2008/09/08 Caterpillar


Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {6128}

Usage:

R1300G LJB
Load Haul Dump:
R1300GSeries II (S/N: RSL1-UP)
R1300G (S/N: LJB1-UP)
Operation and Maintenance Manual, SEBU7334, "R1300G Series II Load Haul Dump", "Maintenance Interval Schedule". This manual is part of Service Manual, RENR8531 Volume 2.Operation and Maintenance Manual, SEBU7329, "R1300G Load Haul Dump", "Maintenance Interval Schedule". This manual is part of Service Manual, RENR6923 Volume 2.

The following information is an addition to the above manuals. Refer to the following information for the service interval and procedure.

Every 10 Service Hours or Daily

Ejector Plate Bearing - Lubricate (If Equipped)

Ejector Plate Bearing - Lubricate

(If Equipped)

Wipe off the fittings before any lubricant is applied.




    Illustration 1g01620714

  1. Apply lubricant through fitting (1) on each side of the bucket for the ejector plate bearings (2 points).

Caterpillar Information System:

2008/08/25 Improved Power Train Software is Available {3168, 7620}
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {5305}
2008/09/01 Correction to Disassembly and Assembly , "Ejector Bucket - Assemble" {6128}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
2008/11/17 A New Circuit Breaker is Now Available {1420, 1429}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Remove
PL61 Pipelayer Machine Systems Accumulator Charging Valve (Boom, Hook) - Assemble
PL61 Pipelayer Machine Systems Accumulator Charging Valve (Boom, Hook) - Disassemble
2008/08/11 Increased Engine Low Idle Helps Eliminate Problems With Air Conditioning {7320}
PL61 Pipelayer Machine Systems Accumulator Charging Valve (Boom, Hook) - Install
785D OEM Off-Highway Truck Machine Systems Air Conditioner - Install
785D OEM Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Install
785D OEM Off-Highway Truck Machine Systems Wiper Arm - Remove and Install
785D OEM Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
320D Excavator Camera
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Instrument Panel - Remove and Install
Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305} Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305}
2008/08/11 Improvements to the Bezel of the Dashboard {7451}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.