Gear Pump (Hoist) - Remove
拆卸步骤
开始:
- 升高卡车车斗然后安装固定缆绳。 请参阅拆解和组装, "卡车车斗固定缆绳 - 拆卸和安装"。
- 释放液压系统压力。 请参阅拆解和组装, "系统压力 - 释放"。
注: 清洁度是一项重要的因素。 拆卸步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
注: 为便于安装,在所有软管组件和所有管组件上做出识别标记。 插接好所有软管组件和所有管组件。 这将有助于防止液体渗漏,并有助于防止污染物进入系统。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。 卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
- 将液压油排入适当的容器以便正确储存或弃置。 请参阅操作和保养手册, "液压系统机油 - 更换"。
- 断开软管组件 (1) 。 断开管组件 (2) 。
Show/hide table
图 1 | g01622831 |
- 断开软管组件 (5) 和软管组件 (3) 。 拆下软管组件 (4) 。
Show/hide table
图 2 | g01622853 |
- 将适当的起吊设备固定到举倾机构泵 (7) 上。 举倾机构泵 (7) 的重量约为 204 kg (450 lb)。
Show/hide table
图 3 | g01622870 |
- 拆下螺栓 (6) ,然后拆下举倾机构泵 (7) 。
Caterpillar Information System:
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Install
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
785D OEM Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {6128}
2008/08/25 Improved Power Train Software is Available {3168, 7620}
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {5305}
2008/09/01 Correction to Disassembly and Assembly , "Ejector Bucket - Assemble" {6128}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
2008/11/17 A New Circuit Breaker is Now Available {1420, 1429}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Remove
PL61 Pipelayer Machine Systems Accumulator Charging Valve (Boom, Hook) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Install
785D OEM Off-Highway Truck Machine Systems Wiper Arm - Remove and Install
785D OEM Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
320D Excavator Camera
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Instrument Panel - Remove and Install
Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305} Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305}
2008/08/11 Improvements to the Bezel of the Dashboard {7451}
430E Backhoe Loader Boom Cylinder - Remove and Install
430E Backhoe Loader Extendable Stick Cylinder - Remove and Install
430E Backhoe Loader Lift Cylinder - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Steering Wheel - Remove and Install