Window Wiper Motor - Remove and Install
Start By:
- Remove the cab front plate. Refer to Disassembly and Assembly, "Plate (Cab Front) - Remove and Install".
- Remove the wiper arm. Refer to Disassembly and Assembly, "Wiper Arm - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove cap (1).
Show/hide table
Illustration 2 g01622834 - Remove nut (2) and washer (3).
Show/hide table
Illustration 3 g01622841 - Disconnect harness assembly (4).
Show/hide table
Illustration 4 g01622839 Show/hide tableIllustration 5 g01622843 - Remove bolts (5) in order to separate cover (6) from the cab wall.
- Remove wiper motor (7).
Show/hide table
Illustration 6 g01622845 - Disconnect hose (8) from the washer spout.
- Remove cover (6).
Show/hide table
Illustration 1 | g01622815 |
- Verify that all of the components of the wiper motor are clean and free of foreign material prior to installation.
- Inspect all of the components for wear and replace the components, if necessary.
Show/hide table
Illustration 7 g01622845 - Install cover (6).
- Connect hose (8) to the washer spout.
Show/hide table
Illustration 8 g01622843 Show/hide tableIllustration 9 g01622839 - Install wiper motor (7) and cover (6) to the cab wall. Install bolts (5). Tighten bolts (5) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .Show/hide tableIllustration 10 g01622841 - Connect harness assembly (4).
Show/hide table
Illustration 11 g01622834 - Install washer (3). Install nut (2). Tighten nut (2) to a torque of
19 ± 1 N·m (168 ± 9 lb in) .Show/hide tableIllustration 12 g01622815 - Install cap (1).
End By:
- Install the wiper arm. Refer to Disassembly and Assembly, "Wiper Arm - Remove and Install".
- Install the cab front plate. Refer to Disassembly and Assembly, "Plate (Cab Front) - Remove and Install".
Caterpillar Information System:
785D OEM Off-Highway Truck Machine Systems Wiper Arm - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Install
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
785D OEM Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {6128}
2008/08/25 Improved Power Train Software is Available {3168, 7620}
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {5305}
2008/09/01 Correction to Disassembly and Assembly , "Ejector Bucket - Assemble" {6128}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
2008/11/17 A New Circuit Breaker is Now Available {1420, 1429}
320D Excavator Camera
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Instrument Panel - Remove and Install
Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305} Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305}
2008/08/11 Improvements to the Bezel of the Dashboard {7451}
430E Backhoe Loader Boom Cylinder - Remove and Install
430E Backhoe Loader Extendable Stick Cylinder - Remove and Install
430E Backhoe Loader Lift Cylinder - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Steering Wheel - Remove and Install
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}