Gear Pump (Hoist) - Install
安装步骤
注: 清洁度是一项重要的因素。 组装之前,应使用清洗液彻底清洁所有零件。 让零件风干。 请勿使用抹布擦干零件。 棉绒可能会留在零件上,从而引发故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。 尘土及其他污染物可能会损坏精密部件。 组装步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。
- 将适当的起吊设备固定到举倾机构泵 (7) 上。 举倾机构泵 (7) 的重量约为 204 kg (450 lb)。
Show/hide table
图 1 | g01622870 |
- 定位举倾机构泵 (7) 。 安装螺栓 (6) 。
- 连接软管组件 (5) 和软管组件 (3) 。 安装软管组件 (4) 。
Show/hide table
图 2 | g01622853 |
- 连接管组件 (2) 。 连接软管组件 (1) 。
Show/hide table
图 3 | g01622831 |
- 向液压油箱注油。 请参阅操作和保养手册, "液压系统油位 - 更换"。
End By: 拆下固定缆绳,然后降下卡车车斗。 请参阅 拆解和组装, "卡车车斗固定缆绳 - 拆卸和安装"。
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Install
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
785D OEM Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {6128}
2008/08/25 Improved Power Train Software is Available {3168, 7620}
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {5305}
2008/09/01 Correction to Disassembly and Assembly , "Ejector Bucket - Assemble" {6128}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
2008/11/17 A New Circuit Breaker is Now Available {1420, 1429}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Remove
785D OEM Off-Highway Truck Machine Systems Wiper Arm - Remove and Install
785D OEM Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
320D Excavator Camera
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Instrument Panel - Remove and Install
Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305} Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305}
2008/08/11 Improvements to the Bezel of the Dashboard {7451}
430E Backhoe Loader Boom Cylinder - Remove and Install
430E Backhoe Loader Extendable Stick Cylinder - Remove and Install
430E Backhoe Loader Lift Cylinder - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Steering Wheel - Remove and Install
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}