The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117}
- Off-Highway Truck/Tractor
- 770G (S/N: KDH1-UP)
- 772G (S/N: RME1-UP; KEX1-1,387-UP; LTX1-UP)
- 777G (S/N: T5A1-123,300-UP; TNM1-884,1000-UP; RDR1-385,522-UP; T4Y1-210,520-UP)
- 772G (S/N: RME1-UP; KEX1-1,387-UP; LTX1-UP)
- Quarry Truck
- 773G (S/N: MWH1-UP; JWS427-UP; T5S126-UP; T5T1-UP)
- 775G (S/N: T5F103-UP; RFM1-UP; MJS651-UP; T5W1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
The pressure setting on the hoist raise 416-8724 Relief Valve Gp may be low on the machines listed above.
Solution
Caterpillar is aware of this problem, but a permanent solution is not defined yet.
Show/hide table
Illustration 1 | g06312563 |
(1) |
Adjust raise relief valve group (1) setting to the proper setting. If setting is lost second time, please submit a Dealer Solution Network (DSN) ticket, quoting CPI issue number 406116.
Refer to Table 1 for the media reference information of the machines.
Show/hide table
Prefix | Media |
KDH | Refer to Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust nullTesting and Adjusting, UENR1122, "770G and 772G Off-Highway Trucks" |
KEX | |
LTX | |
RME | Refer to Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust nullTesting and Adjusting, UENR5295, "770G and 772G Off-Highway Trucks" |
JWS | Refer to Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust nullTesting and Adjusting, KENR9964, "773G and 775G Off-Highway Trucks" |
MWH | |
MJS | |
RFM | |
RDR | Refer to Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust nullTesting and Adjusting, KENR993, "777G Off-Highway Trucks" |
TNM | |
T4Y | Refer to Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust nullTesting and Adjusting, UENR2806, "777G OEM Off-Highway Trucks" |
T5A |
Caterpillar Information System:
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620} Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620}
AP655F and AP655F L Asphalt Paver Declaration of Conformity
CB64B, CB66B and CB68B Asphalt Compactors Machine Electronic Control System Machine Steer not Responding Properly
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Intake Manifold Air Temperature Is High
3516E Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
563D and 573D Wheel Feller Buncher Windows - Clean
Product Link ® Elite PLE742 Systems Service Tools
Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207} Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207}
A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498} A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Control Manifold
The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201} The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201}
An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551} An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551}
Improved Product Link On-Board Software is Now Available for All Cat® Products {7606} Improved Product Link On-Board Software is Now Available for All Cat® Products {7606}
New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606} New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Multi-Processor Hydraulic System
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
PM820, PM822, and PM825 Cold Planer Fuel System Secondary Filter - Replace
PM820, PM822, and PM825 Cold Planer Fuel System Primary Filter (Water Separator) Element - Replace
New Software Updates are Now Available for Certain 773E and 777E Off-Highway Trucks {7490, 7610, 7620} New Software Updates are Now Available for Certain 773E and 777E Off-Highway Trucks {7490, 7610, 7620}
An Improved Stub Shaft is now Used for the CX38 Transmission in Certain 700 Series Articulated Trucks {3063, 3160} An Improved Stub Shaft is now Used for the CX38 Transmission in Certain 700 Series Articulated Trucks {3063, 3160}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Oil Cooler - Lines