Declaration of Conformity
Show/hide table
| Dokumen Pernyataan Kesesuaian EC (European Commission, Komisi Eropa) atau EU (European Union, Uni Eropa) disertakan dengan alat berat jika alat berat diproduksi sesuai dengan persyaratan khusus untuk Uni Eropa. Untuk menentukan rincian Petunjuk yang berlaku, bacalah seluruh Pernyataan Kesesuaian EC atau EU yang disertakan bersama alat berat. Di bawah ini adalah kutipan dari Pernyataan Kesesuaian EC atau EU alat berat yang dinyatakan memenuhi "2006/42/EC" yang hanya berlaku untuk alat berat yang aslinya ditandai "CE" oleh pabrikan yang terdaftar dan sejak saat itu belum dimodifikasi. | ||||||
| PERNYATAAN KESESUAIAN EC atau EU ASLI | ||||||
| Pemanufaktur: CATERPILLAR PAVING PRODUCTS INC. 9401 85th Ave. North Brooklyn Park, MN 55445 USA | ||||||
| Pejabat yang berwenang menyusun File Teknis dan bila diminta mengkomunikasikan bagian yang relevan dari File Teknis ke Badan yang Berwenang di Negara-Negara Anggota Uni Eropa: | ||||||
| Standards & Regulations Manager,Caterpillar France S.A.S,
40 Avenue Leon-Blum 38000 Grenoble, France |
||||||
| Saya, yang bertanda tangan di bawah ini, _________, dengan ini menyatakan bahwa peralatan konstruksi sebagaimana diuraikan di bawah ini | ||||||
| Keterangan: | Nama Generik: | Alat Berat Pengerasan Jalan | ||||
| Fungsi: | Paver Aspal | |||||
| Model/Tipe: | AP655F, AP655F L | |||||
| Nomor Seri: | ||||||
| Nama Komersial: | Caterpillar
|
|||||
| Memenuhi semua ketentuan yang relevan dari Petunjuk Dewan berikut | ||||||
| Petunjuk | Badan Pengawas Resmi | No. Dokumen | ||||
| 2006/42/EC | T/A | |||||
| 2000/14/EC diubah oleh 2005/88/EC, Catatan (1) | ||||||
| 2004/108/EC | T/A | |||||
| 2014/30/EU | T/A | |||||
| Catatan (1) | Lampiran -_____ Tingkat Daya Suara Yang Dijamin -_____dB (A)
Tingkat Daya Suara Tipe Peralatan Percobaan - _____dB (A) Daya Engine per ____-____ kW Kecepatan engine tetapan - _____ rpm Dokumen Teknis dapat diperoleh melalui pihak di atas yang berwenang untuk menyusun File Teknis |
|||||
| Dibuat pada tanggal: | Tanda Tangan | |||||
| Tanggal: | Nama/Jabatan | |||||
| Catatan: Informasi di atas adalah benar per Januari 2015, namun dapat berubah sewaktu-waktu. Untuk perincian tepatnya, rujuk ke pernyataan kesesuaian individual yang disertakan bersama alat berat. | ||||||
Caterpillar Information System:
CB64B, CB66B and CB68B Asphalt Compactors Machine Electronic Control System Machine Steer not Responding Properly
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Intake Manifold Air Temperature Is High
3516E Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
563D and 573D Wheel Feller Buncher Windows - Clean
Product Link ® Elite PLE742 Systems Service Tools
Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207} Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207}
A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498} A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Control Manifold
New C175 High Altitude Low Maintenance Ratio Engine for 797 Off-Highway Trucks {1000} New C175 High Altitude Low Maintenance Ratio Engine for 797 Off-Highway Trucks {1000}
Troubleshooting Procedures for Supercom Data Acquisition Systems are Now Available for Certain Off-Highway Trucks {7600, 7601, 7606, 7620} Troubleshooting Procedures for Supercom Data Acquisition Systems are Now Available for Certain Off-Highway Trucks {7600, 7601, 7606, 7620}
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
Shims Added to Coupler to Decrease Side to Side Motion Are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {6129, 7000} Shims Added to Coupler to Decrease Side to Side Motion Are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {6129, 7000}
Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620} Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117} The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117}
The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201} The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201}
An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551} An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551}
Improved Product Link On-Board Software is Now Available for All Cat® Products {7606} Improved Product Link On-Board Software is Now Available for All Cat® Products {7606}
New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606} New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Multi-Processor Hydraulic System
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
PM820, PM822, and PM825 Cold Planer Fuel System Secondary Filter - Replace