Control Manifold
Show/hide table
| |
| Illustration 1 | g06261444 |
| (1) Control manifold | |
Show/hide table
| |
| Illustration 2 | g06322678 |
|
(1) Control manifold
(2) Gerotor motor | |
Control manifold (1) is designed to relieve pressure in the section of the hydraulic system that operates gerotor motor (2).
The pressure setting of each relief valve is
When each relief valve opens, excess pressure is dumped to the opposite side of the motor circuit. This design prevents total hydraulic pressure loss during rotation and is a safety measure that improves the efficiency of the work tool.
Caterpillar Information System:
New C175 High Altitude Low Maintenance Ratio Engine for 797 Off-Highway Trucks {1000} New C175 High Altitude Low Maintenance Ratio Engine for 797 Off-Highway Trucks {1000}
Troubleshooting Procedures for Supercom Data Acquisition Systems are Now Available for Certain Off-Highway Trucks {7600, 7601, 7606, 7620} Troubleshooting Procedures for Supercom Data Acquisition Systems are Now Available for Certain Off-Highway Trucks {7600, 7601, 7606, 7620}
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
Shims Added to Coupler to Decrease Side to Side Motion Are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {6129, 7000} Shims Added to Coupler to Decrease Side to Side Motion Are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {6129, 7000}
C175 Tier 4 Final Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
3516E Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - With Fuel/Water Separator
2570C and 2670C Wheel Feller Bunchers Cab Tilting
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
An Improved Wheel Speed Sensor is Now Available on Certain RM500B Rotary Mixers {4351, 5058} An Improved Wheel Speed Sensor is Now Available on Certain RM500B Rotary Mixers {4351, 5058}
Cleaning Procedure for the Polycarbonate Windshields, Windows, and Skylights on Certain Forest Machines, Track Feller Bunchers, Wheel Feller Bunchers, and Wheel Skidders {7310, 7340} Cleaning Procedure for the Polycarbonate Windshields, Windows, and Skylights on Certain Forest Machines, Track Feller Bunchers, Wheel Feller Bunchers, and Wheel Skidders {7310, 7340}
Slow or Inoperable Telescoping Cylinder During Retraction on Certain Telehandlers {5325, 5362} Slow or Inoperable Telescoping Cylinder During Retraction on Certain Telehandlers {5325, 5362}
Certain Cat® Product Link Device Back-Office May Not Allow to Set Hours Locally {7606} Certain Cat® Product Link Device Back-Office May Not Allow to Set Hours Locally {7606}
A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498} A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498}
Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207} Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207}
Product Link ® Elite PLE742 Systems Service Tools
563D and 573D Wheel Feller Buncher Windows - Clean
3516E Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Intake Manifold Air Temperature Is High
CB64B, CB66B and CB68B Asphalt Compactors Machine Electronic Control System Machine Steer not Responding Properly
AP655F and AP655F L Asphalt Paver Declaration of Conformity
Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620} Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117} The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117}