Coupling Pump - Disassemble
Start By:
- Remove fittings (2) from pump (1).
Note: Mark all sections of pump (1) for assembly purposes.
- Remove nuts (3) from pump (1).
Show/hide table
Illustration 2 g00904860 - Remove end plate (4) from pump (1).
Show/hide table
Illustration 3 g00904876 - Remove O-ring seal (5) from end plate (4).
Show/hide table
Illustration 4 g00904879 - Remove body (6) from pump (1).
Show/hide table
Illustration 5 g00905086 - Remove O-ring seal (7) from body (6).
Show/hide table
Illustration 6 g00904881 Show/hide tableIllustration 7 g00904882 - Remove body (8) from pump (1).
- Remove key (9) from shaft (10).
Show/hide table
Illustration 8 g00904883 - Remove O-ring seal (11) from body (8).
Show/hide table
Illustration 9 g00904892 - Remove body (12) from pump (1).
Show/hide table
Illustration 10 g00904894 - Remove O-ring seals (13) and (14) from body (11).
Show/hide table
Illustration 11 g00904896 - Remove body (15) from pump (1).
- Remove key (16) from shaft (10).
Show/hide table
Illustration 12 g00904897 - Remove O-ring seal (17) from body (15).
Show/hide table
Illustration 13 g00904910 - Remove body (18) from pump (1).
Show/hide table
Illustration 14 g00904911 - Remove shaft (10) from body (18).
Show/hide table
Illustration 15 g00904913 - Remove O-ring seal (19) from pump (1).
Show/hide table
Illustration 16 g00904914 - Remove O-ring seal (20) from pump (1).
Show/hide table
Illustration 1 | g00904858 |
- Remove mechanical seal (1) and stationary seat from behind the front section of the pump.
Show/hide table
Illustration 17 | g06323743 |
Caterpillar Information System:
Field Installation of the Engine Speed Control{1915} Field Installation of the Engine Speed Control{1915}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210} Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210}
TH210 and TH215 Telehandlers Machine Systems Boom - Assemble
R1600 Load Haul Dump Machine Electrical System Battery Disconnect Switch
CB-634D Paving Compactor Machine Electronic Control System Backup Alarm Always On
2002/07/15 Inspect the Joints of the Exhaust System {1061}
CB-634D Paving Compactor Machine Electronic Control System Relays
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Bypass Valve
247 and 257 Multi Terrain Loaders Machine Systems Control Valve (Work Tool) - Install
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Speed/Timing Sensor
CB-434C Vibratory Compactor Ring Bearing - Lubricate
2002/07/15 Correction to Testing and Adjusting , "Rear Axle Housing End Play - Adjust" {3260}
3524B Engine for Caterpillar Built Machines Coupling Pump - Assemble
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Assemble
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Disassemble
CB-434C Vibratory Compactor Rollover Protective Structure (ROPS) - Inspect
C4.4 Industrial Engine Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Specifications
2002/07/15 Addition to Testing and Adjusting , "Clutch Pedal - Adjust" {5157}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel Housing
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Coolant Flow Switch
CB-434C Vibratory Compactor Steering Cylinder Ends - Lubricate
24H Motor Grader Final Drive Lip Seal - Replace