Battery Disconnect Switch
The components of the battery disconnect switch circuit are the batteries and the battery disconnect switch.
Show/hide table
 | |
| Illustration 1 | g00904577 |
Right side view of rear frame (1) Batteries | |
Show/hide table
 | |
| Illustration 2 | g00904582 |
Right side of engine (2) Battery disconnect switch | |
When battery disconnect switch (2) is in the ON position the switch contacts close to connect the batteries to the machine ground. When the battery disconnect switch is in the OFF position the switch contacts open to disconnect the batteries from the machine found. When the battery disconnect switch is in the OFF position, power is not supplied to any electrical systems on the machine.
Show/hide table
| NOTICE |
|---|
Never turn the battery disconnect switch to OFF while the engine is running. Electrical system damage could result. |
Show/hide table
 | |
| Illustration 3 | g00904580 |
Battery disconnect switch circuit | |
Caterpillar Information System:
CB-634D Paving Compactor Machine Electronic Control System Backup Alarm Always On
2002/07/15 Inspect the Joints of the Exhaust System {1061}
CB-634D Paving Compactor Machine Electronic Control System Relays
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Bypass Valve
247 and 257 Multi Terrain Loaders Machine Systems Control Valve (Work Tool) - Install
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Speed/Timing Sensor
CB-434C Vibratory Compactor Ring Bearing - Lubricate
3508 EUI Engines for Caterpillar Built Machines Alternator and Regulator
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0629 - FMI 04
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Transmission Clutch Running Clearance - Check
CB-434C Vibratory Compactor Radiator Core - Clean
3126B Engine for 570B and 580B Wheel Harvesters System Configuration Parameters
TH210 and TH215 Telehandlers Machine Systems Boom - Assemble
Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210} Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139}
Field Installation of the Engine Speed Control{1915} Field Installation of the Engine Speed Control{1915}
3524B Engine for Caterpillar Built Machines Coupling Pump - Disassemble
2002/07/15 Correction to Testing and Adjusting , "Rear Axle Housing End Play - Adjust" {3260}
3524B Engine for Caterpillar Built Machines Coupling Pump - Assemble
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Assemble
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Disassemble
CB-434C Vibratory Compactor Rollover Protective Structure (ROPS) - Inspect
C4.4 Industrial Engine Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Specifications