Specifications
Show/hide table
Illustration 1 | g00911524 |
Basic machine specifications are listed in the following tables.
Show/hide table
950G Series II Wheel Loader | |
---|---|
Maximum Weight | |
Height to top of ROPS (A) | |
Maximum Length (B) | |
Width Across Tires | |
Counterweight (Standard) | |
Show/hide table
962G Series II Wheel Loader | |
---|---|
Maximum Weight | |
Height to top of ROPS (A) | |
Maximum Length (B) | |
Width Across Tires | |
Counterweight (Standard) | |
Show/hide table
IT62G Series II Integrated Toolcarrier | |
---|---|
Maximum Weight | |
Height to top of ROPS (A) | |
Maximum Length (B) | |
Width Across Tires | |
Counterweight (Standard) | |
Caterpillar Information System:
C4.4 Industrial Engine Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
CB-434C Vibratory Compactor Rollover Protective Structure (ROPS) - Inspect
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Disassemble
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Assemble
3524B Engine for Caterpillar Built Machines Coupling Pump - Assemble
2002/07/15 Correction to Testing and Adjusting , "Rear Axle Housing End Play - Adjust" {3260}
3524B Engine for Caterpillar Built Machines Coupling Pump - Disassemble
Field Installation of the Engine Speed Control{1915} Field Installation of the Engine Speed Control{1915}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210} Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210}
TH210 and TH215 Telehandlers Machine Systems Boom - Assemble
R1600 Load Haul Dump Machine Electrical System Battery Disconnect Switch
2002/07/15 Addition to Testing and Adjusting , "Clutch Pedal - Adjust" {5157}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel Housing
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Coolant Flow Switch
CB-434C Vibratory Compactor Steering Cylinder Ends - Lubricate
24H Motor Grader Final Drive Lip Seal - Replace
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Pulley
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0668 - FMI 02
2002/07/22 The Engine Oil Recommendation for 3500 Series Diesel Engines has Changed {1000, 7560}
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Slack Adjuster (Rear)
3056E Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs
267, 277 and 287 Multi Terrain Loaders Machine Systems Hydrostatic System Troubleshooting