Engine Speed/Timing Sensor
Show/hide table
| |
| Illustration 1 | g00904526 |
|
Typical example | |
(1) Sensor slip head
- Extend the sensor slip head to a minimum distance of
4 mm (.16 inch) prior to installation. - Position the sensor slip head at the maximum point of the timing ring along the center line of the sensor.
(2) Control assembly
- Torque ...
40 ± 5 N·m (30 ± 4 lb ft)
Put 4C-5597 Anti-Seize Compound on the threads.
(3) Plug with socket A, socket B, and socket C.
Caterpillar Information System:
CB-434C Vibratory Compactor Ring Bearing - Lubricate
3508 EUI Engines for Caterpillar Built Machines Alternator and Regulator
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0629 - FMI 04
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Transmission Clutch Running Clearance - Check
CB-434C Vibratory Compactor Radiator Core - Clean
3126B Engine for 570B and 580B Wheel Harvesters System Configuration Parameters
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0590 - FMI 12
CB34, CB34XW and CC34 Utility Compactors Reference Material
CB-434C Vibratory Compactor Hydraulic Tank Vent - Replace
2002/07/29 A New Lock Valve for the Seat is Used {7312}
3126B Engine for Caterpillar Built Machines Poor Acceleration or Response
3126B Engine for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
247 and 257 Multi Terrain Loaders Machine Systems Control Valve (Work Tool) - Install
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Bypass Valve
CB-634D Paving Compactor Machine Electronic Control System Relays
2002/07/15 Inspect the Joints of the Exhaust System {1061}
CB-634D Paving Compactor Machine Electronic Control System Backup Alarm Always On
R1600 Load Haul Dump Machine Electrical System Battery Disconnect Switch
TH210 and TH215 Telehandlers Machine Systems Boom - Assemble
Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210} Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139}
Field Installation of the Engine Speed Control{1915} Field Installation of the Engine Speed Control{1915}
3524B Engine for Caterpillar Built Machines Coupling Pump - Disassemble
2002/07/15 Correction to Testing and Adjusting , "Rear Axle Housing End Play - Adjust" {3260}