Engine Oil Pump - Disassemble
开始:
- 拆下发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前，应彻底清洁部件外部。 污垢将被阻止进入内部机构。 污染物或污垢可能会损坏精密部件。 拆解步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
- 从泵体 (1) 上拆下螺栓 (2) 和盖 (3)。
- 从泵体 (1) 上拆下弹簧 (4) 和滑阀 (5)。
Show/hide table
图 4 g00905011 Show/hide table
图 5 g00905012 - 从盖 (7) 上拆下螺栓 (6)。
- 从泵体 (1) 上卸下盖 (7)。
Show/hide table
图 6 g00905016 - 从盖 (7) 上拆下密封垫 (8)。
Show/hide table
图 7 g00905020 Show/hide table
图 8 g00905023 - 从盖 (10) 上拆下螺栓 (9)。
- 从泵体 (1) 上卸下盖 (10)。
Show/hide table
图 9 g00905024 - 从盖 (10) 拆下轴承 (11)。
Show/hide table
图 10 g00905027 - 从泵体 (1) 上拆下轴 (12)、轴 (13) 和轴 (14)。
Show/hide table
图 11 g03733479 - 从泵体 (1) 上拆下轴承 (15)。
Show/hide table
| |
| 图 1 | g00905006 |
Show/hide table
| |
| 图 2 | g00905007 |
Show/hide table
| |
| 图 3 | g00905008 |
Show/hide table
 |
|
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
Caterpillar Information System:
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Assemble
3524B Engine for Caterpillar Built Machines Coupling Pump - Assemble
2002/07/15 Correction to Testing and Adjusting , "Rear Axle Housing End Play - Adjust" {3260}
3524B Engine for Caterpillar Built Machines Coupling Pump - Disassemble
Field Installation of the Engine Speed Control{1915} Field Installation of the Engine Speed Control{1915}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797 and 797B Off-Highway Truck Transmission {3030, 3073, 3139}
Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210} Bench Test Procedure for a 797 and 797B Off-Highway Truck Torque Converter Inlet Relief Valve, Torque Converter Outlet Relief Valve, and Transmission Main Relief Valve {3030, 3101, 3133, 3210}
TH210 and TH215 Telehandlers Machine Systems Boom - Assemble
R1600 Load Haul Dump Machine Electrical System Battery Disconnect Switch
CB-634D Paving Compactor Machine Electronic Control System Backup Alarm Always On
2002/07/15 Inspect the Joints of the Exhaust System {1061}
CB-634D Paving Compactor Machine Electronic Control System Relays
CB-434C Vibratory Compactor Rollover Protective Structure (ROPS) - Inspect
C4.4 Industrial Engine Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Specifications
2002/07/15 Addition to Testing and Adjusting , "Clutch Pedal - Adjust" {5157}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel Housing
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Coolant Flow Switch
CB-434C Vibratory Compactor Steering Cylinder Ends - Lubricate
24H Motor Grader Final Drive Lip Seal - Replace
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Pulley
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0668 - FMI 02
2002/07/22 The Engine Oil Recommendation for 3500 Series Diesel Engines has Changed {1000, 7560}
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Slack Adjuster (Rear)