Steering Control
Show/hide table
 | |
| Illustration 1 | g00904066 |
Displacement ... 462 cc (28.2 in3)
(1) Torque for setscrew ... 11 ± 1 N·m (97 ± 9 lb in)
(2) Pin and the groove of the drive shaft must be aligned with the root of the rotor. The alignment is required for correct timing.
(3) Initial torque for bolts ... 17 N·m (150 lb in)
(3) Final torque for bolts ... 28 ± 3 N·m (248 ± 27 lb in)
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
2002/07/22 Use the Correct Torque for the Bolts that Secure the Belt Guard {1357, 7174}
R1700G Load Haul Dump Differential and Final Drive Oil Level (Without Axle Oil Cooler) - Check
R1700G Load Haul Dump Differential and Final Drive Oil Level (With Axle Oil Cooler) - Check
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0368 - FMI 04
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Hydraulic Pump
CB-434C Vibratory Compactor Fuel Tank Water and Sediment - Drain
R1700G Load Haul Dump Differential and Final Drive Oil (Without Axle Oil Cooler) - Change
R1700G Load Haul Dump Differential and Final Drive Oil (With Axle Oil Cooler) - Change
C-12, C-15 and C-16 Engines for Caterpillar Built Machines System Configuration Parameters
789C Off-Highway Truck/Tractor Speed Sensor (Automatic Electronic Traction Aid)
CB-434C Vibratory Compactor Fuel Tank Cap and Strainer - Clean
2002/07/08 New Systems Operation, RENR6127, "IQAN Monitoring & Control System" is Available {7600}
CB-434C Vibratory Compactor Fuses - Replace
2002/07/22 Special Instruction, REHS1115, "Procedure for the Installation of a Separate Brake Pump" {3108, 5056, 5070, 7306}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Connecting Rod
CB-434C Vibratory Compactor Hydraulic System Oil - Change
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0444 - FMI 04
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston and Rings
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Articulating and Oscillating Hitch
3126B Engine for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
R1600 Load Haul Dump Machine Electrical System General Information
R1600 Load Haul Dump Machine Electrical System Electrical Power Supply