Usage:
31Mar2015 |
Priority | PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THREAD SEALANT TO THE FUEL PUMP FITTING ON CERTAIN 246D, 262D, 272D SKID STEER LOADERS, 277D, 297D MULTI TERRAIN LOADERS, AND 279D, 289D, 299D XHP COMPACT TRACK LOADERS. |
|
1256 | PI32469 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI32469" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI32469" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
COMPLETION DATE |
TERMINATION DATE |
30Sep2015 | 31Mar2016 |
PROBLEM
The fuel pump fitting needs to be inspected on certain 246D, 262D, 272D Skid Steer Loaders, 277D, 297D Multi Terrain Loaders, and 279D, 289D, 299D XHP Compact Track Loaders. The existing fitting may be missing thread sealant that can allow fuel to leak past the fitting threads. |
AFFECTED PRODUCT
Model | Identification Number |
246D | BYF01678, 1681 HMR01225-01226, 1229, 1234 |
262D | DTB03050, 3052, 3064 |
272D | B5W01142-01143, 1149 |
277D | FMT00566-00568 MLT00162 |
279D | GTL02228-02229, 2235, 2239 |
289D | TAW03037 |
297D | BE700289 |
299D XHP | JST01376 |
PARTS NEEDED
No parts needed for this program |
ACTION REQUIRED
Refer to the attached Rework Procedure. |
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification: US Canada |
SERVICE CLAIM ALLOWANCES
NOTE: This is a 0.5-hour job | |||||
Note: An allowance of $5 US Dollars is allowed for thread sealant. |
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
EXAMPLE COPY OF OWNER NOTIFICATION XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THREAD SEALANT TO THE FUEL PUMP FITTING MODELS INVOLVED - CERTAIN 246D, 262D, 272D SKID STEER LOADERS, 277D, 297D MULTI TERRAIN LOADERS, AND 279D, 289D, 299D XHP COMPACT TRACK LOADERS Dear Cat Product Owner: The fuel pump fitting needs to be inspected on the products listed below. The existing fitting may not have thread sealant applied thus allowing fuel to leak past the threads. You will not be charged for the service performed. Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 31Mar2015 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 31Mar2015 Service Letter |
1. Visually check for presence of white thread sealer. Refer to Image1.1.1. - If sealant is present ? no further action is required. - If sealant is NOT present, proceed to Step 2. |
Image1.1.1 |
2. Remove fitting and apply Loctite 536 thread sealant to threads on fitting. Refer to Image1.2.1. |
Image1.2.1 |
3. Reinstall the fitting and tighten to specified torque of 8 +/-1 N.m (6 +/-0.75 ft-lb). |