Rollover Protection System (ROPS)
Usage:
Remove And Install ROPS
Show/hide table
Use only specified bolts for installing or replacing the ROPS. Failure to use proper bolts or torque could result in failure during a rollover. Tighten bolts to a torque of 360 N·m (270 lb ft) |
1. Attach a hoist to ROPS (1).
2. Remove the bolts from ROPS (1).
3. Remove ROPS (1). The weight of the ROPS is 454 kg (1000 lb).
NOTE: To install ROPS, reverse the removal steps.
Caterpillar Information System:
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Rear Scraper
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Steer Pivot
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Drum
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Parking Brake
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Front Scraper
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Steering Valve
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Vibratory System Filter Assembly
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Vibratory Motor
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Axle And Differential
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Rear Wheel Assembly
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Axle Propel Motor
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Vibratory Pump
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Priority Check Valve
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Propel System Relief Valve
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Brake Valve
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Anti-lope Valve
CS-551 VIBRATORY COMPACTOR VEHICLE SYSTEMS Steer Cylinder
CB-514 VIBRATORY DRUM Introduction
CB-514 VIBRATORY DRUM Vibratory Drum Components
CB-514 VIBRATORY DRUM Drum Assembly
CB-514 VIBRATORY DRUM Drum Support (Propel Side)
CB-514 VIBRATORY DRUM Drum Support
CB-514 VIBRATORY DRUM Internal Drum
CB-414 VIBRATORY DRUM Vibratory Drum Components