The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}
- Retrofit Aftertreatment
- SCR (S/N: ES71-UP; ESH1-UP)
The 376-8441 Display Panel in the dosing cabinet is discontinued and no longer being supported.
The operator can use a device that has Ethernet capability for each Dosing Cabinet or have one on site.
The connection process is covered in SIS web using the serial number prefix or the System Operation, Testing and Adjusting, UENR3366. The two default links to connect to controller:
- http://169.254.0.2/caterpillar/web/operation.htm
- http://169.254.0.2/caterpillar/web/setup.htm
Caterpillar Information System:
The Wiring Harness May Fail on Certain C13 Engines {1408, 1900} The Wiring Harness May Fail on Certain C13 Engines {1408, 1900}
308 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174} A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174}
A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479} A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479}
New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290} New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290}
New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C} New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C}
The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290} The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290}
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate - Offset Boom (If Equipped)
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate
Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270} Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270}
308 Mini Hydraulic Excavators Operator Controls
New Software Is Now Used for Certain C27 C32 Engines {1920} New Software Is Now Used for Certain C27 C32 Engines {1920}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}
C7.1-XQ230 Rental Generator Set Coolant Sample (Level 1) - Obtain
C7.1-XQ230 Rental Generator Set Engine Air Cleaner Element - Replace
Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A} Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A}
New Engine Software Is Used for Certain C9.3 Marine Engines {7432} New Engine Software Is Used for Certain C9.3 Marine Engines {7432}
Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451} Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451}
New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319} New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319}
G3500H Generator Set Engine Speed Control - Test
The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225} The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225}
G3500H Generator Set Engine Nitrogen Oxide Level - Test
313 and 313 GC Excavator Fuel Tank Shutoff and Drain Control