Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270}
- Engine
- 3512C (S/N: WF31-UP; WF51-UP)
- Petroleum Engine
- 3512C PETROLEUM (S/N: R1A1-UP; R1S1-UP)
- Pumper
- SPF343C (S/N: R2A1-UP)
The improved DGB regulator service kit includes additional wear items that were not included in the previous kit.
The following changes are now available for the products within the listed serial numbers.
Table 1 contains the part number for this change.
Show/hide table
Part Number | Part Name | Quantity |
---|---|---|
Regulator Kit | 1 |
Caterpillar Information System:
308 Mini Hydraulic Excavators Operator Controls
New Software Is Now Used for Certain C27 C32 Engines {1920} New Software Is Now Used for Certain C27 C32 Engines {1920}
313 and 313 GC Excavator Additional Messages
315 GC and 315 Excavator Diesel Exhaust Fluid Injector - Replace
313 and 313 GC Excavator Safety Messages
315 GC and 315 Excavator Fire Extinguisher Location
3516E Generator Sets Air Inlet Filter - Inspect/Clean/Test
315 GC and 315 Excavator Fuses - Replace
315 GC and 315 Excavator Engine Oil and Filter - Change
315 GC and 315 Excavator Diesel Exhaust Fluid Filter - Replace
Sound Suppression Cover May Crack on Certain 336, 336 GC and 345 GC Excavators {7252} Sound Suppression Cover May Crack on Certain 336, 336 GC and 345 GC Excavators {7252}
315 GC and 315 Excavator Access Door and Cover Locations
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate - Offset Boom (If Equipped)
The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290} The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290}
New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C} New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C}
New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290} New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290}
A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479} A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479}
A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174} A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174}
308 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
The Wiring Harness May Fail on Certain C13 Engines {1408, 1900} The Wiring Harness May Fail on Certain C13 Engines {1408, 1900}
The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900} The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}