Boom and Stick Linkage - Lubricate - Offset Boom (If Equipped)
Wipe all fittings before applying lubricant.
Show/hide table
Illustration 1 | g06394217 |
- Apply lubricant through the three fittings on the upper boom cylinder.
- Apply lubricant through the two fittings on the offset boom cylinder.
- Apply lubricant through the three fittings on the offset support link.
Caterpillar Information System:
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate
Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270} Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270}
308 Mini Hydraulic Excavators Operator Controls
New Software Is Now Used for Certain C27 C32 Engines {1920} New Software Is Now Used for Certain C27 C32 Engines {1920}
313 and 313 GC Excavator Additional Messages
315 GC and 315 Excavator Diesel Exhaust Fluid Injector - Replace
313 and 313 GC Excavator Safety Messages
315 GC and 315 Excavator Fire Extinguisher Location
3516E Generator Sets Air Inlet Filter - Inspect/Clean/Test
315 GC and 315 Excavator Fuses - Replace
315 GC and 315 Excavator Engine Oil and Filter - Change
315 GC and 315 Excavator Diesel Exhaust Fluid Filter - Replace
The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290} The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290}
New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C} New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C}
New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290} New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290}
A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479} A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479}
A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174} A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174}
308 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
The Wiring Harness May Fail on Certain C13 Engines {1408, 1900} The Wiring Harness May Fail on Certain C13 Engines {1408, 1900}
The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900} The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}
C7.1-XQ230 Rental Generator Set Coolant Sample (Level 1) - Obtain
C7.1-XQ230 Rental Generator Set Engine Air Cleaner Element - Replace