New Software Is Now Used for Certain C27 C32 Engines {1920}
- Generator Set
- C27 GEN SET (S/N: 2A31-568; DWB1-3545; GDS1-1066; T4Z1-483)
- C32 GEN SET (S/N: AL61-251; K7C1-1084; NRC1-538; SXC1-92024; JSJ1-92010; FLX1-684; JAZ1-4190)
- Track-Type Tractor
- SALES1A (S/N: NEW1-167)
Description Of Change: There is a new histogram for time versus engine speed and load factor added with an extended range for load factor. The new range equals 0 to 100% with 10% incremental step sizes.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The table below contains the new and previous software part numbers.
Show/hide table
| New Software Part Number | Part Name | Previous Software Part Number |
|---|---|---|
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
Caterpillar Information System:
313 and 313 GC Excavator Additional Messages
315 GC and 315 Excavator Diesel Exhaust Fluid Injector - Replace
313 and 313 GC Excavator Safety Messages
315 GC and 315 Excavator Fire Extinguisher Location
3516E Generator Sets Air Inlet Filter - Inspect/Clean/Test
315 GC and 315 Excavator Fuses - Replace
315 GC and 315 Excavator Engine Oil and Filter - Change
315 GC and 315 Excavator Diesel Exhaust Fluid Filter - Replace
Sound Suppression Cover May Crack on Certain 336, 336 GC and 345 GC Excavators {7252} Sound Suppression Cover May Crack on Certain 336, 336 GC and 345 GC Excavators {7252}
315 GC and 315 Excavator Access Door and Cover Locations
315 GC and 315 Excavator Engine and Machine Warm-Up
2D GRADE System for 140 and 120 Motor Graders Visual Inspection
308 Mini Hydraulic Excavators Operator Controls
Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270} Improved Dynamic Gas Blending (DGB) Regulator Service Kit is Now Available for Certain 3512C Engines {1270}
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate
308 Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate - Offset Boom (If Equipped)
The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290} The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290}
New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C} New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C}
New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290} New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290}
A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479} A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479}
A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174} A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174}
308 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
The Wiring Harness May Fail on Certain C13 Engines {1408, 1900} The Wiring Harness May Fail on Certain C13 Engines {1408, 1900}
The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900} The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}