Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A}
- Power Module
- XQC1200 (S/N: N1G1-120)
- XQC1600 (S/N: ME21-104; N1M1-315)
Description Of Change: Improved cover assemblies and air filter supports have changed designs to provide more protection against cracking experienced on certain 60 Hz Generator Set packages.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Reference: Refer to Special Instruction , M0096207 , Rework Procedure for the Rear Cover and Air Filter Support Assembly on Certain 3500 Generator Sets for installation instructions.Table 1 contains the part numbers for this change.
Show/hide table
| New Part Number | Part Name | Qty |
|---|---|---|
| Access Cover Gp | 1 | |
| Access Cover Gp | 1 | |
| Access Cover Gp | 1 | |
| Access Cover Gp | 1 |
Caterpillar Information System:
C7.1-XQ230 Rental Generator Set Engine Air Cleaner Element - Replace
C7.1-XQ230 Rental Generator Set Coolant Sample (Level 1) - Obtain
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900} The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}
The Wiring Harness May Fail on Certain C13 Engines {1408, 1900} The Wiring Harness May Fail on Certain C13 Engines {1408, 1900}
308 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174} A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174}
A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479} A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479}
New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290} New Fuel Injectors are Now Used on Certain C9 Engines {1251, 1290}
New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C} New Fuel Line Support Covers are Now Used for Certain C175 Off-Highway Truck Engines {1150, 795C}
The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290} The Fuel Injector and Quill Installation Procedure is Being Updated for Certain C9.3B Engines {1251, 1290}
New Engine Software Is Used for Certain C9.3 Marine Engines {7432} New Engine Software Is Used for Certain C9.3 Marine Engines {7432}
Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451} Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451}
New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319} New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319}
G3500H Generator Set Engine Speed Control - Test
The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225} The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225}
G3500H Generator Set Engine Nitrogen Oxide Level - Test
313 and 313 GC Excavator Fuel Tank Shutoff and Drain Control
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400} Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
313 and 313 GC Excavator Fuel System Primary Filter (Water Separator) Element - Replace
313 and 313 GC Excavator Engine Oil and Filter - Change
PM620 and PM622 Cold Planer Maintenance Interval Schedule
A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274} A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274}