313 and 313 GC Excavator Caterpillar


Fuel Tank Shutoff and Drain Control

Usage:

313 JHR


Ilustrasi 1g06394865
Katup kuras tangki bahan bakar

Katup Kuras Tangki Bahan Bakar (1) - Katup kuras untuk tangki bahan bakar terletak di pintu akses sisi kanan. Untuk menguras air dan sedimen dari tangki bahan bakar, putar katup kuras bahan bakar berlawanan arah putaran jarum jam. Untuk menutup katup kuras tangki bahan bakar, putar katup kuras searah putaran jarum jam.

Catatan: Untuk informasi lebih lanjut tentang pengurasan air dan sedimen dari tangki bahan bakar, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Air dan Sedimen Tangki Bahan Bakar - Pengurasan".

Caterpillar Information System:

G3500H Generator Set Engine Nitrogen Oxide Level - Test
The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225} The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225}
G3500H Generator Set Engine Speed Control - Test
New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319} New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319}
Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451} Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451}
New Engine Software Is Used for Certain C9.3 Marine Engines {7432} New Engine Software Is Used for Certain C9.3 Marine Engines {7432}
Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A} Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A}
C7.1-XQ230 Rental Generator Set Engine Air Cleaner Element - Replace
C7.1-XQ230 Rental Generator Set Coolant Sample (Level 1) - Obtain
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900} The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400} Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
313 and 313 GC Excavator Fuel System Primary Filter (Water Separator) Element - Replace
313 and 313 GC Excavator Engine Oil and Filter - Change
PM620 and PM622 Cold Planer Maintenance Interval Schedule
A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274} A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274}
Oil Screens May Crack and Degrade on Certain C175 Commercial Engines {1151, 1162, 1206} Oil Screens May Crack and Degrade on Certain C175 Commercial Engines {1151, 1162, 1206}
New Engine Software for Certain C4.4 Machine Engines {7610, 7620} New Engine Software for Certain C4.4 Machine Engines {7610, 7620}
PM820, PM822, and PM825 Cold Planer Access Ladder Operation - Right Handrail Extend and Retract
New Bus Bar is Now Used on Certain 3516B HD Low-Voltage Generator Set Engines {4450, 445B} New Bus Bar is Now Used on Certain 3516B HD Low-Voltage Generator Set Engines {4450, 445B}
PM820, PM822, and PM825 Cold Planer Side Plate - Index Marks
The Fuel Injectors May Fail on Certain C7 and C9 Truck Engines {1251, 1254, 1290, 1713} The Fuel Injectors May Fail on Certain C7 and C9 Truck Engines {1251, 1254, 1290, 1713}
Procedure to Update Pump Electronic Tank Unit (PETU) Coolant Lines on Certain 797F and 793F Off-Highway Trucks {108H, 108J, 108K, 1091, 726A} Procedure to Update Pump Electronic Tank Unit (PETU) Coolant Lines on Certain 797F and 793F Off-Highway Trucks {108H, 108J, 108K, 1091, 726A}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.