New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319}
- Engine
- G3516 (S/N: ZBA1-2093; L6F1-161)
- G3516B (S/N: ZBC1-1015)
Description Of Change: The orientation of the new prelubrication oil pump group has changed and is equipped with a plug in the electrical box to prevent water from entering the motor.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Table 1 contains the new and previous part numbers for this change.
Show/hide table
| New Part Number | New Part Name | Previous Part Number | Quantity |
|---|---|---|---|
| Prelubrication Oil Pump Gp | 441-0374 | 1 |
Caterpillar Information System:
Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451} Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451}
New Engine Software Is Used for Certain C9.3 Marine Engines {7432} New Engine Software Is Used for Certain C9.3 Marine Engines {7432}
Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A} Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A}
C7.1-XQ230 Rental Generator Set Engine Air Cleaner Element - Replace
C7.1-XQ230 Rental Generator Set Coolant Sample (Level 1) - Obtain
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900} The Dosing Cabinet Display for the Retrofit Aftertreatment is Discontinued {1408, 1900}
The Wiring Harness May Fail on Certain C13 Engines {1408, 1900} The Wiring Harness May Fail on Certain C13 Engines {1408, 1900}
308 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174} A New Fan Blade Torque Procedure is Now Used on Certain 3516C 50 HZ Generator Sets {1356, 1359, 1360, 7174}
A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479} A New Oil Pan Site Glass Film is Now Used on Certain Off-Highway Truck Engines {7479}
G3500H Generator Set Engine Speed Control - Test
The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225} The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225}
G3500H Generator Set Engine Nitrogen Oxide Level - Test
313 and 313 GC Excavator Fuel Tank Shutoff and Drain Control
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400} Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
313 and 313 GC Excavator Fuel System Primary Filter (Water Separator) Element - Replace
313 and 313 GC Excavator Engine Oil and Filter - Change
PM620 and PM622 Cold Planer Maintenance Interval Schedule
A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274} A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274}
Oil Screens May Crack and Degrade on Certain C175 Commercial Engines {1151, 1162, 1206} Oil Screens May Crack and Degrade on Certain C175 Commercial Engines {1151, 1162, 1206}
New Engine Software for Certain C4.4 Machine Engines {7610, 7620} New Engine Software for Certain C4.4 Machine Engines {7610, 7620}
PM820, PM822, and PM825 Cold Planer Access Ladder Operation - Right Handrail Extend and Retract