Fuel Lines
Show/hide table
| |
| Illustration 1 | g06313823 |
Show/hide table
| Item | Qty | Part Number | Specification Description |
|---|---|---|---|
| 1 | 1 | - | Tighten the cap to |
| 2 | 2 | - | Torque to |
| 3 | 1 | - | Tighten bowl to |
Caterpillar Information System:
AC Shore Power Harness Assembly is Now Labeled and Connected to Control Box on Certain C27 and C32 Generator Set Engines {1408} AC Shore Power Harness Assembly is Now Labeled and Connected to Control Box on Certain C27 and C32 Generator Set Engines {1408}
Power End Filtration Installation for Well Stimulation Pumps {5068, 6002} Power End Filtration Installation for Well Stimulation Pumps {5068, 6002}
Improved Diesel Exhaust Fluid (DEF) Manifold Is Now Used on Certain Cat® Products {108K, 3206} Improved Diesel Exhaust Fluid (DEF) Manifold Is Now Used on Certain Cat® Products {108K, 3206}
Improved Diesel Exhaust Fluid (DEF) Manifold Is Now Used on Certain Cat® Engines {108K, 3206} Improved Diesel Exhaust Fluid (DEF) Manifold Is Now Used on Certain Cat® Engines {108K, 3206}
C7.1 Marine Propulsion Engine Engine Electronics
New Turbo Water Supply Line Is Now Used on Certain Cat® Engines {1052, 1380} New Turbo Water Supply Line Is Now Used on Certain Cat® Engines {1052, 1380}
New Integrated Sensor Module (ISM) Software Is Now Used for Certain G3600 Engines {1920, 1920} New Integrated Sensor Module (ISM) Software Is Now Used for Certain G3600 Engines {1920, 1920}
C7.1 Marine Propulsion Engine Sensors and Electrical Components
An Improved Camshaft Gear is Now Used on Certain C15 and C18 Machine Engines {1212} An Improved Camshaft Gear is Now Used on Certain C15 and C18 Machine Engines {1212}
C7.1 Marine Propulsion Engine Configuration Parameters
The Radiators May Leak Coolant Around the Gaskets on Certain XQC1600 Power Modules {1353} The Radiators May Leak Coolant Around the Gaskets on Certain XQC1600 Power Modules {1353}
336, 336 GC and 340 Excavator Systems Accumulator (Pilot) - Test and Charge - Pump Actuator
307, 308, 309 and 310 EXCAVATOR Hydraulic Tank and Filter
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Motor
336 Excavator Machine Systems Camera - Remove and Install - Rear Camera
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Pilot Valve (Swing Parking Brake)
TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T} TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T}
C27 and C32 Generator Set Engines Engine Support (Front) - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Relief Valve (Swing)
307, 308, 309 and 310 EXCAVATOR Stick Lines
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pedal Control (Auxiliary)
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pedal Control (Auxiliary)
307, 308, 309 and 310 EXCAVATOR Stick Lines