301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Caterpillar


Pedal Control (Auxiliary)

Usage:

301.8 H8X


Illustration 1g06292194
Typical example

Table 1
Item  Qty  Part  Specification Description 
8T-4136 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in)

Caterpillar Information System:

307, 308, 309 and 310 EXCAVATOR Stick Lines
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Relief Valve (Swing)
C27 and C32 Generator Set Engines Engine Support (Front) - Remove and Install
TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T} TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Pilot Valve (Swing Parking Brake)
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
336 Excavator Machine Systems Camera - Remove and Install - Rear Camera
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Motor
307, 308, 309 and 310 EXCAVATOR Hydraulic Tank and Filter
307, 308, 309 and 310 EXCAVATOR Fuel Lines
AC Shore Power Harness Assembly is Now Labeled and Connected to Control Box on Certain C27 and C32 Generator Set Engines {1408} AC Shore Power Harness Assembly is Now Labeled and Connected to Control Box on Certain C27 and C32 Generator Set Engines {1408}
Power End Filtration Installation for Well Stimulation Pumps {5068, 6002} Power End Filtration Installation for Well Stimulation Pumps {5068, 6002}
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pedal Control (Auxiliary)
307, 308, 309 and 310 EXCAVATOR Stick Lines
336 Excavator Machine Systems Camera - Remove and Install - Left Camera
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Bucket Cylinder
336 Excavator Machine Systems Camera - Remove and Install - Front Camera
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Oil Makeup (Swing System)
336 Excavator Machine Systems Camera - Remove and Install - Right Camera
C27 and C32 Generator Set Engines Alternator - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Travel System)
307, 308, 309 and 310 EXCAVATOR Operator Platform
307, 308, 309 and 310 EXCAVATOR Pilot Lines
307, 308, 309 and 310 EXCAVATOR Refrigerant Compressor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.