Pedal Control (Auxiliary)
Show/hide table
Illustration 1 | g06292204 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
A | - | - | Amount of free play is 12 degrees. |
2 | - | 8T-0114 Spring Pin | The spring pin must not protrude beyond the surface of the stopper (1). |
B | - | - | Protrusion of the spring pin (2) from the surface of the stopper (1) is |
3 | 2 | 8T-4136 Bolt | Torque to |
Caterpillar Information System:
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pedal Control (Auxiliary)
307, 308, 309 and 310 EXCAVATOR Stick Lines
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Relief Valve (Swing)
C27 and C32 Generator Set Engines Engine Support (Front) - Remove and Install
TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T} TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Pilot Valve (Swing Parking Brake)
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
336 Excavator Machine Systems Camera - Remove and Install - Rear Camera
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Motor
307, 308, 309 and 310 EXCAVATOR Hydraulic Tank and Filter
307, 308, 309 and 310 EXCAVATOR Fuel Lines
AC Shore Power Harness Assembly is Now Labeled and Connected to Control Box on Certain C27 and C32 Generator Set Engines {1408} AC Shore Power Harness Assembly is Now Labeled and Connected to Control Box on Certain C27 and C32 Generator Set Engines {1408}
307, 308, 309 and 310 EXCAVATOR Stick Lines
336 Excavator Machine Systems Camera - Remove and Install - Left Camera
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Bucket Cylinder
336 Excavator Machine Systems Camera - Remove and Install - Front Camera
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Oil Makeup (Swing System)
336 Excavator Machine Systems Camera - Remove and Install - Right Camera
C27 and C32 Generator Set Engines Alternator - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Travel System)
307, 308, 309 and 310 EXCAVATOR Operator Platform
307, 308, 309 and 310 EXCAVATOR Pilot Lines
307, 308, 309 and 310 EXCAVATOR Refrigerant Compressor
336 Excavator Machine Systems Position Sensor (Swing) - Remove and Install