C12.9 Marine Engines Caterpillar


Engine Support (Front) - Remove and Install

Usage:

C12.9 PC7

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite Moly Paste 

Start By:

  1. Remove vibration damper.


    Illustration 1g06064480

  1. Remove bolts (1). Remove engine support (2).

  2. Repeat step 1 for the other side.


    Illustration 2g06064489

  3. Remove bolts (3) and engine support (4).

Installation Procedure

  1. Install engine supports (2) in the reverse order of removal.

    1. Apply Tooling (A) to bolts (1). Tighten bolts (1) to a torque of 420 ± 70 N·m (310 ± 52 lb ft).

    2. Apply Tooling (A) to bolts (3). Tighten bolts (3) to a torque of 520 ± 80 N·m (384 ± 60lb ft).

Caterpillar Information System:

G3512 Generator Set Engines Speed/Timing - Test
Coolant Drain and Vacuum Fill Procedure For Certain C9.3 Through C18 Tier 4 Engines {0708, 1350, 1354, 1377} Coolant Drain and Vacuum Fill Procedure For Certain C9.3 Through C18 Tier 4 Engines {0708, 1350, 1354, 1377}
Cat® Reman Announces Engine Option for Certain 3406C Marine Engines {1000} Cat® Reman Announces Engine Option for Certain 3406C Marine Engines {1000}
C175-16 Locomotive Engine Oil Pressure Is Low
3512E Engines Venturi Tube - Remove and Install
C3.3 Industrial Engine Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C3.3 Industrial Engine Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Generator Sets Turbocharger
C3.3 Industrial Engine Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install
C12.9 Marine Engines Engine Support (Rear) - Remove and Install
3516E Generator Set Coolant Level - Check
C175-16 Locomotive Engine Fuel Control - Test
C175-20 Locomotive Engine Fuel Pressure Is Low
TR35 Railway Transmission Capacities (Refill)
C12.9 Marine Engines Fuel Injection Pump - Remove and Install
TR35 Railway Transmission Transmission Cooling System
C175 Tier 4 Final Engines for Off-Highway Trucks Data Link Configuration Status - Test
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Control Module Temperature Is High
TR35 Railway Transmission Lifting and Tying Down the Transmission
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Does Not Purge
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pump - Replace
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Sensors and Electrical Components
Valve Stem Seals on Certain C1.1,C1.5, and C2.2 Engines {1100} Valve Stem Seals on Certain C1.1,C1.5, and C2.2 Engines {1100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.