Engine Oil Filter Base - Remove and Install
Show/hide table
Required Tooling | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
- Use Tooling (A) to remove oil filter (3).
- Remove bolts (1), oil filter base (2), and the gasket.
Show/hide table
Illustration 1 | g06140959 |
- Install oil filter base (2) in the reverse order of removal.
Caterpillar Information System:
C12.9 Marine Engines Engine Support (Rear) - Remove and Install
3516E Generator Set Coolant Level - Check
320 GC, 320 and 323 Excavator Engine Air Filter Primary and/or Secondary Element - Replace
New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620} New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620}
New Engine Software for Certain C4.4 Generator Sets {7610, 7620} New Engine Software for Certain C4.4 Generator Sets {7610, 7620}
G3512 Generator Set Engines Data Link Configuration Status - Test
C12.9 Marine Engines Flywheel Housing - Remove and Install
New Software Is Now Used on Certain C175-16 Engines {1920} New Software Is Now Used on Certain C175-16 Engines {1920}
G3516 TA Engine Data Link - Test
3512E Engines Exhaust Gas Valve (NRS) - Remove and Install
C12.9 Marine Engines Crankshaft - Remove and Install
A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061} A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061}
C3.3 Industrial Engine Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C4.4 Generator Sets Turbocharger
C3.3 Industrial Engine Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C3.3 Industrial Engine Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
3512E Engines Venturi Tube - Remove and Install
C175-16 Locomotive Engine Oil Pressure Is Low
Cat® Reman Announces Engine Option for Certain 3406C Marine Engines {1000} Cat® Reman Announces Engine Option for Certain 3406C Marine Engines {1000}
Coolant Drain and Vacuum Fill Procedure For Certain C9.3 Through C18 Tier 4 Engines {0708, 1350, 1354, 1377} Coolant Drain and Vacuum Fill Procedure For Certain C9.3 Through C18 Tier 4 Engines {0708, 1350, 1354, 1377}
G3512 Generator Set Engines Speed/Timing - Test
C12.9 Marine Engines Engine Support (Front) - Remove and Install
C175-16 Locomotive Engine Fuel Control - Test
C175-20 Locomotive Engine Fuel Pressure Is Low