New Software Is Now Used on Certain C175-16 Engines {1920}
- Generator Set
- C175-16 (S/N: WYC1-UP)
Description Of Change: The new software has been improved to allow the Fuel Control Valve (FCV) position to be viewed or data logged in Cat® Electronic Technician (ET).
Adaptable To: The new 503-9261 Engine Software replaces the existing 474-5565 Engine Software. The new software is adaptable back to first production on the serial numbers listed above.
This change is effective for the serial numbers listed in Table1.
Show/hide table
Effective Serial Numbers |
S/N:WYC02006-UP |
Caterpillar Information System:
G3516 TA Engine Data Link - Test
3512E Engines Exhaust Gas Valve (NRS) - Remove and Install
C12.9 Marine Engines Crankshaft - Remove and Install
A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061} A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061}
A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557} A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557}
A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205} A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205}
3516C Generator Set Engines Air Inlet Manifold - Remove and Install
Autonomous Stop (A-Stop) System Components
Autonomous Stop (A-Stop) General Information
Selective Catalytic Reduction Retrofit Aftertreatment Electronic Service Tools
G3512 Generator Set Engines Data Link - Test
797F Off-Highway Truck Capacities (Refill)
C12.9 Marine Engines Flywheel Housing - Remove and Install
G3512 Generator Set Engines Data Link Configuration Status - Test
New Engine Software for Certain C4.4 Generator Sets {7610, 7620} New Engine Software for Certain C4.4 Generator Sets {7610, 7620}
New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620} New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620}
320 GC, 320 and 323 Excavator Engine Air Filter Primary and/or Secondary Element - Replace
3516E Generator Set Coolant Level - Check
C12.9 Marine Engines Engine Support (Rear) - Remove and Install
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install
C3.3 Industrial Engine Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C4.4 Generator Sets Turbocharger
C3.3 Industrial Engine Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C3.3 Industrial Engine Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft