Exhaust Gas Valve (NRS) - Remove and Install
- Remove bolts (1) and cover (2).
Show/hide table
Illustration 2 g06063618 - Disconnect harness assembly (4).
- Disconnect hose assembly (3) and hose assembly (5).
Show/hide table
Illustration 3 g06063694 - Remove four bolts (6) and exhaust valve cooler (7).
Show/hide table
Illustration 1 | g06063585 |
- Install exhaust valve cooler (7) in the reverse order of removal.
Caterpillar Information System:
C12.9 Marine Engines Crankshaft - Remove and Install
A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061} A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061}
A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557} A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557}
A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205} A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205}
3516C Generator Set Engines Air Inlet Manifold - Remove and Install
Autonomous Stop (A-Stop) System Components
Autonomous Stop (A-Stop) General Information
Selective Catalytic Reduction Retrofit Aftertreatment Electronic Service Tools
G3512 Generator Set Engines Data Link - Test
797F Off-Highway Truck Capacities (Refill)
C7.1 Marine Engine Exhaust Manifold - Remove and Install
Autonomous Stop (A-Stop) A-Stop Transmitter
G3516 TA Engine Data Link - Test
New Software Is Now Used on Certain C175-16 Engines {1920} New Software Is Now Used on Certain C175-16 Engines {1920}
C12.9 Marine Engines Flywheel Housing - Remove and Install
G3512 Generator Set Engines Data Link Configuration Status - Test
New Engine Software for Certain C4.4 Generator Sets {7610, 7620} New Engine Software for Certain C4.4 Generator Sets {7610, 7620}
New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620} New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620}
320 GC, 320 and 323 Excavator Engine Air Filter Primary and/or Secondary Element - Replace
3516E Generator Set Coolant Level - Check
C12.9 Marine Engines Engine Support (Rear) - Remove and Install
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install
C3.3 Industrial Engine Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C4.4 Generator Sets Turbocharger