Crankshaft Position Sensor - Remove and Install
- Disconnect harness assembly (3). Remove bolt (1) and crankshaft position sensor (2). Remove the O-ring seal from the crankshaft position sensor.
Show/hide table
| |
| Illustration 1 | g02163782 |
- Install the crankshaft position sensor (2) in the reverse order of removal.
- Lubricate the O-ring seal with the lubricant that is being sealed prior to the installation of crankshaft position sensor (2).
Caterpillar Information System:
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Plate Locations and Film Locations
A New Turbocharger Is Now Used On Certain 3516C Engines {1052, 1053} A New Turbocharger Is Now Used On Certain 3516C Engines {1052, 1053}
G3512 Generator Set Product Description
Bench Test Procedure For A TA22 Construction Transmission {0374, 0599, 3030, 3065, 3139, 3167, 3182} Bench Test Procedure For A TA22 Construction Transmission {0374, 0599, 3030, 3065, 3139, 3167, 3182}
XQP150 Rental Generator Set Generator Lead Connections
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Pressure Is Low
C18 Generator Set Engines Camshaft Position Sensor - Remove and Install
C12.9 Marine Engines Aftercooler - Remove and Install - High-Pressure
XQP150 Rental Generator Set Control Panel
3512E Engines Housing (Front) - Remove and Install
C7.1 Industrial Engine Flywheel Housing - Remove and Install
C18 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
C18 Generator Set Engines Coolant Temperature Sender - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Emissions Certification Film
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Reference Information
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Product Lifting
XQP150 Rental Generator Set Setup
C18 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Alarms and Shutoffs
G3512 Generator Set Engines Sensor Signal (Analog, Active) - Test
C18 Generator Set Engines Crankcase Pressure Sensor - Remove and Install
C18 Generator Set Engines Fuel Pressure Sensor - Remove and Install
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Check Valve
G3512 Generator Set Before Starting Engine