C18 Generator Set Engines Caterpillar


Engine Oil Pressure Sensor - Remove and Install

Usage:

C18 GEN SE RT8

Removal Procedure



    Illustration 1g06053198

  1. Disconnect harness assembly (1) and remove engine oil pressure sensor (2).

Installation Procedure

  1. Install atmospheric pressure sensor (2) in the reverse order of removal.

    1. Tighten atmospheric pressure sensor 2 to a torque of 10 ± 2 N·m (88.5 ± 17.7 lb in).

Caterpillar Information System:

XQP150 Rental Generator Set Setup
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Product Lifting
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Reference Information
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Emissions Certification Film
C18 Generator Set Engines Coolant Temperature Sender - Remove and Install
C18 Generator Set Engines Crankshaft Position Sensor - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Plate Locations and Film Locations
A New Turbocharger Is Now Used On Certain 3516C Engines {1052, 1053} A New Turbocharger Is Now Used On Certain 3516C Engines {1052, 1053}
G3512 Generator Set Product Description
Bench Test Procedure For A TA22 Construction Transmission {0374, 0599, 3030, 3065, 3139, 3167, 3182} Bench Test Procedure For A TA22 Construction Transmission {0374, 0599, 3030, 3065, 3139, 3167, 3182}
XQP150 Rental Generator Set Generator Lead Connections
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Pressure Is Low
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Alarms and Shutoffs
G3512 Generator Set Engines Sensor Signal (Analog, Active) - Test
C18 Generator Set Engines Crankcase Pressure Sensor - Remove and Install
C18 Generator Set Engines Fuel Pressure Sensor - Remove and Install
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Check Valve
G3512 Generator Set Before Starting Engine
G3512 Generator Set Cold Weather Starting
G3512 Generator Set Emergency Stopping
C9.3 Marine Auxiliary and Generator Set Engine Speed Control - Test
G3512 Generator Set Refill Capacities
C18 Generator Set Engines Fuel Temperature Sensor - Remove and Install
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395} General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.