Drive Plate
Show/hide table
Illustration 1 | g01409680 |
(1) Install the first bolt loosely and rotate 180 degrees. Install all bolts and tighten all bolts. The bolts must thread freely before tightening.
(2) Install the first bolt loosely and rotate 180 degrees. Install all bolts and tighten all bolts. The bolts must thread freely before tightening.
(3) Sparingly apply 4C-5599 Anti-Seize Compound to the bore of the crankshaft adapter.
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
C7 On-Highway Engine Rocker Shaft and Pushrod - Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3825 - FMI 8
C7 On-Highway Engine Rocker Shaft and Pushrod - Remove
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 191 - FMI 8
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 161 - FMI 8
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3027 - FMI 3
C7 On-Highway Engine Connecting Rod Bearings - Install
C7 On-Highway Engine Connecting Rod Bearings - Remove
C7 On-Highway Engine Pistons and Connecting Rods - Install
C7 PETROLEUM Petroleum Engine Air Inlet Heater - Remove and Install
2006/04/17 A New Impeller is Now Used in the Sea Water Pump of Marine Engines {1371}
C7 and C9 On-highway Engines Emissions Certification Film
CX31 On-Highway Transmission Oil Filter (Transmission)
C7 On-Highway Engine Fuel Injection Pump - Remove
C7 On-highway Engine Air Lines - Aftertreatment Regeneration Device
3500B Industrial Engines with the ADEM 3 Electronic Control Module Electrical Connectors and Functions
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Gear Pump (Transmission)
C11 and C13 Petroleum Engines Rocker Arm - Disassemble
C11 and C13 Petroleum Engines Rocker Arm - Assemble
C9 On-highway Engine Engine Oil Pan
C7 On-Highway Engine Lifter Group - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Turbocharger Oil Lines