Electrical Connectors and Functions
Engine Electronic Control Module (ECM)
Show/hide table
Illustration 1 | g01219014 |
Connectors for the ECM |
Sensor Connectors
Show/hide table
Illustration 2 | g01207085 |
Typical engine connectors |
Machine Interface Connector
Show/hide table
Illustration 3 | g01262541 |
Service Tool Connector for Cat ET
Show/hide table
Illustration 4 | g01158896 |
9 pin connector |
Caterpillar Information System:
C7 On-highway Engine Air Lines - Aftertreatment Regeneration Device
C7 On-Highway Engine Fuel Injection Pump - Remove
CX31 On-Highway Transmission Oil Filter (Transmission)
C7 and C9 On-highway Engines Emissions Certification Film
CX28 On-Highway Transmission Drive Plate
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
C7 On-Highway Engine Rocker Shaft and Pushrod - Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3825 - FMI 8
C7 On-Highway Engine Rocker Shaft and Pushrod - Remove
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 191 - FMI 8
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 161 - FMI 8
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3027 - FMI 3
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Gear Pump (Transmission)
C11 and C13 Petroleum Engines Rocker Arm - Disassemble
C11 and C13 Petroleum Engines Rocker Arm - Assemble
C9 On-highway Engine Engine Oil Pan
C7 On-Highway Engine Lifter Group - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Turbocharger Oil Lines
3500B Industrial Engines with the ADEM 3 Electronic Control Module Diagnostic Code List
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
C13 Engine Pistons and Connecting Rods - Remove
C13 Engine Pistons and Connecting Rods - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure