Gear Pump (Transmission)
Show/hide table
Illustration 1 | g03377299 |
Typical example |
Show/hide table
Specification for 265-5143 Gear Pump Gp, 282-9538 Gear Pump Gp, and 390-1869 Gear Pump Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 160-8742 Bolt | Torque to |
2 | 1 | 6V-8635 Connector | Torque to |
3 | 1 | 6V-8635 Connector | Torque to |
4 | 1 | 263-5056 Tube As | Torque to |
Show/hide table
Illustration 2 | g03382301 |
Oil pump body assembly |
Show/hide table
Item | Qty | Part | Specification Description |
5 | 4 | 8M-8489 Dowel | Extension (A) of the dowel is |
Show/hide table
Illustration 3 | g03382302 |
273-5693 Pump Cover |
Show/hide table
Illustration 4 | g03382303 |
389-0415 Pump Manifold Assembly |
Show/hide table
Item | Qty | Part | Specification Description |
6 | 4 | 129-4536 Bushing | After installation, bore in the bushing is Installation depth (F) of the bushing is |
D | - | - | Position of bearing joints from the centerline through the bearing bores is 30 ± 15 degrees. |
7 | 2 | 8M-8489 Dowel | Extension (E) of the dowel is |
Caterpillar Information System:
3500B Industrial Engines with the ADEM 3 Electronic Control Module Electrical Connectors and Functions
C7 On-highway Engine Air Lines - Aftertreatment Regeneration Device
C7 On-Highway Engine Fuel Injection Pump - Remove
CX31 On-Highway Transmission Oil Filter (Transmission)
C7 and C9 On-highway Engines Emissions Certification Film
CX28 On-Highway Transmission Drive Plate
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
C7 On-Highway Engine Rocker Shaft and Pushrod - Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3825 - FMI 8
C7 On-Highway Engine Rocker Shaft and Pushrod - Remove
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 191 - FMI 8
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 161 - FMI 8
C11 and C13 Petroleum Engines Rocker Arm - Disassemble
C11 and C13 Petroleum Engines Rocker Arm - Assemble
C9 On-highway Engine Engine Oil Pan
C7 On-Highway Engine Lifter Group - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Turbocharger Oil Lines
3500B Industrial Engines with the ADEM 3 Electronic Control Module Diagnostic Code List
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
C13 Engine Pistons and Connecting Rods - Remove
C13 Engine Pistons and Connecting Rods - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure
C7 On-Highway Engine Fuel Injection Pump - Install