Blower Motor (Air Conditioner, Heater) - Remove
Start By:
- Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Note: Put identification marks on all lines, hoses, wires, and tubes for installation purposes. Plug all lines, hoses and tubes. This helps prevent fluid loss and contamination of the oil system.
- Turn the disconnect switch to the OFF position.
Show/hide table
Illustration 1 g01418893 - Remove bolts (2) and plate (1).
Show/hide table
Illustration 2 g01418938 - Disconnect harness assembly (3). Harness assembly (3) is located underneath the right side of the cab.
Show/hide table
Illustration 3 g01418939 - Remove screws (5) and storage box (4).
Show/hide table
Illustration 4 g01418940 - Remove screw (7) and frame assembly (6).
Show/hide table
Illustration 5 g01418942 - Remove screw (9) and rubber mat (8).
Show/hide table
Illustration 6 g01418943 - Remove bolts (10), plate (11), and the gasket.
Show/hide table
Illustration 7 g01418944 - Remove screws (12) and harness assembly (13).
- Disconnect harness assemblies (16) and (17).
- Remove screws (14) and blower motor (15).
Caterpillar Information System:
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System Hydraulic Oil Cooler
2007/12/10 The Cushion-Hitch Lines Group is Updated {5057}
C32 Engine for D11T Track-Type Tractors Sensor Supply - Test
2008/04/28 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 03" {1426}
2007/12/10 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2007/12/10 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2007/12/10 Correction to Systems Operation Troubleshooting Testing and Adjusting , "System Schematic" {7566}
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0967 - FMI 02
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Cab - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Cab - Remove
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
D11T Track-Type Tractor Power Train Location of Power Train Components
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Blower Motor (Air Conditioner, Heater) - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Heater Coil - Remove
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Heater Coil - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Metering Pump (HMU) - Remove
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Metering Pump (HMU) - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Seat - Remove and Install
910K and 914K Compact Wheel Loaders Steering Wheel - Remove and Install
C32 Engine for D11T Track-Type Tractors Starting Aid - Test
2008/04/28 The Apron Link Pin and the Retainer Have Been Improved {6202}
2007/11/12 Improved Air Conditioning Condenser Core Is Now Available {1805, 7320}
D7E Track-Type Tractor Monitoring System Data Link
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Hydraulic Tank - Remove