910K and 914K Compact Wheel Loaders Caterpillar

Removal Procedure

Start By:

1. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

1. Turn the battery disconnect switch to the OFF position.
   Show/hide table

   Illustration 1	g01419162

2. Remove horn button (2) from steering wheel (1).
   Show/hide table

   Illustration 2	g01419163

3. Disconnect harness assembly (3) and remove horn button (2).
   Show/hide table

   Illustration 3	g01419164

4. Remove nut (4). If necessary, use Tooling (A) to remove steering wheel (1).

Installation Procedure

Show/hide table

Illustration 4	g01419164

1. Install steering wheel (1) and nut (4). Tighten nut (4) to a torque of 48 ± 5 N·m (35 ± 4 lb ft).
   Show/hide table

   Illustration 5	g01419163

2. Connect harness assembly (3) to horn button (2).
   Show/hide table

   Illustration 6	g01419162

3. Install horn button (2) on steering wheel (1).

4. Turn the battery disconnect switch to the ON position.

End By:

1. Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".