906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Caterpillar

Heater Coil - Remove

Usage:

Removal Procedure

Start By:

Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove".

Show/hide table

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat^® products. Dispose of all fluids according to local regulations and mandates.

Note: Put identification marks on all lines, hoses, wires, and tubes for installation purposes. Plug all lines, hoses and tubes. This helps prevent fluid loss and contamination of the oil system.

Turn the battery disconnect switch to the OFF position.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct procedure.
Show/hide table

Illustration 1 g01418893
Remove bolts (2) and plate (1).
Show/hide table

Illustration 2 g01418894
Loosen the clamps. Remove hoses (4) and (5) from heater coil (3).
Show/hide table

Illustration 3 g01418896
Remove screw (7), screw (8), and storage box (6).
Show/hide table

Illustration 4 g01418897
Remove screw (10) and frame assembly (9).
Show/hide table

Illustration 5 g01418895
Remove screw (12) and rubber mat (11).
Show/hide table

Illustration 6 g01418905
Remove bolts (13), plate (14), and the gasket.
Show/hide table

Illustration 7 g01418906
Remove screws (15) and heater coil (3) from the cab.