Cab - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Brackets | 4 |
- Attach a suitable lifting device and Tooling (A) to cab (12). Install cab (12) and bolts (34). The weight of cab (12) is approximately
771 kg (1700 lb) .Show/hide table
Illustration 3 g01418795 - Install cable assembly (33) to the cab and tighten jam nut (32).
- Install pin (30) and clip (31).
Show/hide table
Illustration 4 g01418794 - Install panel (29) and the bolts.
Show/hide table
Illustration 5 g01418793 - Install storage box (28) and the bolts.
Show/hide table
Illustration 6 g01418792 - Install cover (27) and the bolts.
Show/hide table
Illustration 7 g01418700 - Connect hose assemblies (26) to hydraulic hand control (25).
Show/hide table
Illustration 8 g01418699 - Install cover (24) and the bolts.
Show/hide table
Illustration 9 g01418698 - Connect hose (23) and tighten the clamp.
- Connect hose (22) and tighten the clamp.
- Install spacer (21) and bolt (20) to hose (22).
Show/hide table
Illustration 10 g01418697 - Install cover (19) and the bolts.
Show/hide table
Illustration 11 g01418696 - Connect hoses (18) to cab (12).
Show/hide table
Illustration 12 g01418695 - Connect cable assembly (17) to cab (12) and install the nut.
- Connect harness assembly (15) and harness assembly (16) to cab (12).
Show/hide table
Illustration 13 g01418694 - Install cover (14) and bolts (13).
Show/hide table
Illustration 14 g01418693 - Install ground strap (11) and the bolt to cab (12).
Show/hide table
Illustration 15 g01418692 - Install cable assembly (9) and clip (10) to the cab.
- Install governor pedal gp (5). Install pin (8) and the cotter pin to cable assembly (9).
Show/hide table
Illustration 16 g01418691 - Reposition governor pedal gp (5) and install bolts (6).
- Connect harness assembly (7).
Show/hide table
Illustration 17 g01418690 - Reposition hose assembly (3) and hose assemblies (4). Connect hose assembly (3) and hose assemblies (4).
Show/hide table
Illustration 18 g01418688 - Install cover (2) and the bolts. Lock lock (1).
- Fill the cooling system with coolant. Refer to Operation and Maintenance Manual for the correct procedure.
- Turn the disconnect switch to the ON position.
Show/hide table
| |
| Illustration 1 | g01418796 |
Show/hide table
| |
| Illustration 2 | g01418797 |
Caterpillar Information System:
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Cab - Remove
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
D11T Track-Type Tractor Power Train Location of Power Train Components
C32 Engine for D11T Track-Type Tractors Sensor Signal (Analog, Passive) - Test
906H, 907H and 908H Compact Wheel Loaders Engine Supplement Water Temperature Regulator - Remove and Install
906H, 907H and 908H Compact Wheel Loaders Engine Supplement Water Pump - Remove and Install
C32 Engine for D11T Track-Type Tractors Sensor Signal (Analog, Active) - Test
3176C and 3196 Engines for Caterpillar Built Machines Fuel Filter (Primary)
2007/11/05 The Pressure Switch for the Winch is Updated {5163}
2007/11/12 A New Switch for the Rear Windshield Wiper Is Used {7332}
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Fuel Tank - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Fuel Tank - Remove
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0967 - FMI 02
2007/12/10 Correction to Systems Operation Troubleshooting Testing and Adjusting , "System Schematic" {7566}
2007/12/10 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2007/12/10 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2008/04/28 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 03" {1426}
C32 Engine for D11T Track-Type Tractors Sensor Supply - Test
2007/12/10 The Cushion-Hitch Lines Group is Updated {5057}
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System Hydraulic Oil Cooler
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Blower Motor (Air Conditioner, Heater) - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Heater Coil - Remove
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Heater Coil - Install