 |
|
Personal injury or death can result from a fire. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. |
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Open the access door from the front left side of the fuel tank.
Show/hide table
Illustration 1 g00820017 - Close fuel shutoff valve (1) to the OFF position.
- Open the right engine guard.
Show/hide table
Illustration 2 g00817225 - Disconnect hose assemblies (3) and (4).
- Remove bolts (2) and (5).
- Remove fuel filter assemblies (6).
Show/hide table
Illustration 3 g00817234 - Remove bolts (7) and washers.
- Remove fuel filter base (8).
|
|
Personal injury or death can result from a fire. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. |
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Install fuel filter base (8) with washers and bolts (7).
Show/hide table
Illustration 5 g00817225 - Install fuel filter assemblies (6).
- Install bolts (5) and (2).
- Connect hose assemblies (4) and (3).
- Close the right engine guard.
Show/hide table
Illustration 6 g00820059 - Open fuel shutoff valve (1) to the ON position.
- Close the access door.
| |
| Illustration 4 | g00817234 |
