Engine Oil Filter Base - Assemble
Assembly Procedure
- Inspect the condition of the O-ring seals. Replace the seals, if necessary.
- Install retainer (36), plunger (35), spring (34), spacer (33), and retainer (32) into oil filter base (20) .
Show/hide table
Illustration 1 | g00817098 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Position cover (30) and O-ring seal (31) on oil filter base (20) .
- Install bolts (28) and washers (29) that hold cover (30) .
- Install plug (26) and O-ring seal (27) into oil filter base (20) .
Show/hide table
Illustration 2 | g00816565 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Install the following items into oil filter base (20) : oil pump bypass valve (21), retainer (22), spring (23), spacer (24) and retainer (25) .
- Install bolts (16), washers (17), cover (18), and O-ring seal (19) into oil filter base (20) .
- Install retainer (15), plunger (14), spring (13), spacer (12), and retainer (11) into oil filter base (20) .
- Position cover (9) and O-ring seal (10) on oil filter base (20) .
- Install bolts (7) and washers (8) that hold cover (9) .
- Install the relief valve assembly.
- Install spacer (5) on bolt (2) .
- Install the following items into the oil filter base: retainer (6), spring (4), seat (3) and bolt (2) .
Show/hide table
Illustration 3 | g00816515 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Install O-ring seals (1) into the oil filter base.
- Install the O-rings. Install the adapter and the covers onto the oil filter base.
End By: Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
D10R Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
D6R Series II Track-Type Tractor Power Train Steering Differential and Brake - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Power Train MID 081 - CID 0444 - FMI 03
3306B Engine Supplement for 637G Wheel Scraper Slave Cylinder (Governor Control) - Disassemble
621G and 627G Wheel Tractor-Scrapers Machine Systems Push-Pull Hook - Remove and Install
980G Series II Wheel Loader Power Train Electronic Control Module (Power Train) - Replace
3306B Engine Supplement for 637G Wheel Scraper Slave Cylinder (Governor Control) - Install
3306B Engine Supplement for 637G Wheel Scraper Slave Cylinder (Governor Control) - Remove
D10R Track-Type Tractor Engine Supplement Alternator - Remove and Install
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Hood - Remove and Install
3306B Engine Supplement for 637G Wheel Scraper Water Pump - Install
621G and 623G Wheel Tractor Power Train Transmission Hydraulic Control Valve - Remove
D6R Series II Track-Type Tractor Power Train Steering Differential and Brake - Assemble
Improved Air Conditioning System on Large Track-Type Tractors Improved Air Conditioning System on Large Track-Type Tractors
D10R Track-Type Tractor Engine Supplement Fuel Filter Base - Remove and Install
D8R Series II Track-Type Tractor Hydraulic System Pressure Reducing Valve
980G Series II Wheel Loader Power Train Electronic Control Module (Power Train) - Flash Program
D7R Track-Type Tractor Power Train Axle - Remove and Install
D10R Track-Type Tractor Engine Supplement Fumes Disposal - Remove and Install
D8R Series II Track-Type Tractor Hydraulic System Accumulator
966G Series II Wheel Loader and 972G Series II Wheel Loader Power Train MID 081 - CID 0444 - FMI 05
D10R Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
621G and 623G Wheel Tractor Power Train Transmission Hydraulic Control Valve - Install
621G and 623G Wheel Tractor Power Train Transmission Electronic Control Module - Remove and Install