MID 036 - CID 0295 - FMI 09 Unable to communicate with Transmission ECM
Conditions Which Generate This Code:
The ECM detects all of the following conditions:
- The engine is not cranking.
- Battery voltage is greater than 19 VDC for the last 5 seconds.
- Communication stops for 0.4 seconds after successful communication has been established with the machine ECM.
System Response:
The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on ET. The check engine lamp will illuminate. All features that depend on the Cat Data Link will be disabled.
- None
Test Step 1. Perform the following test: CAT Data Link
Results:
- OK - Stop.
Caterpillar Information System:
621G and 623G Wheel Tractor Power Train Transmission Electronic Control Module - Remove and Install
621G and 623G Wheel Tractor Power Train Transmission Hydraulic Control Valve - Install
D10R Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Power Train MID 081 - CID 0444 - FMI 05
D8R Series II Track-Type Tractor Hydraulic System Accumulator
D10R Track-Type Tractor Engine Supplement Fumes Disposal - Remove and Install
D7R Track-Type Tractor Power Train Axle - Remove and Install
980G Series II Wheel Loader Power Train Electronic Control Module (Power Train) - Flash Program
D8R Series II Track-Type Tractor Hydraulic System Pressure Reducing Valve
D10R Track-Type Tractor Engine Supplement Fuel Filter Base - Remove and Install
Improved Air Conditioning System on Large Track-Type Tractors Improved Air Conditioning System on Large Track-Type Tractors
D6R Series II Track-Type Tractor Power Train Steering Differential and Brake - Assemble
D3G, D4G and D5G Track-Type Tractors Sound Information and Vibration Information
980G Series II Wheel Loader Power Train Calibration and Programming
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Calibration and Programming
D10R Track-Type Tractor Engine Supplement Oil Filter and Cooler Bypass Valve - Remove and Install
D10R Track-Type Tractor Engine Supplement Engine Oil Cooler - Remove
3406E Engine Supplement for 621G, 623G, and 627G Wheel Tractor Fuel Filter Base (Secondary) and Priming Pump - Remove and Install
2001/08/20 Correction to Operation and Maintenance Manual, SEBU7206, "834G Wheel Tractor and 836G Landfill Compactor" , "Refill Capacities" {7560}
980G Series II Wheel Loader Power Train System Schematic
3406E Engine Supplement for 621G, 623G, and 627G Wheel Tractor Air Compressor - Remove and Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer System Schematic
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft
D10R Track-Type Tractor Engine Supplement Engine Oil Cooler - Install