Bulldozer Tilt Cylinder - Install
Installation Procedure
Show/hide table
Tools Needed     | A     | B     |
FT-2583 Alignment Sleeve     | 1     |     |
138-7574 Link Bracket     |     | 1     |
- Attach a suitable lifting device and a hoist to the tilt cylinder, as shown. The weight of the tilt cylinder is approximately 860 kg (1896 lb).
Show/hide table
Illustration 1 | g00535509 |
- Use Tooling (A) to align the bores of the rod end of the tilt cylinder. Install pin (4) . Tooling (A) is not shown.
- Install pin (5) .
- Install hydraulic hose assemblies (3) on the tilt cylinder.
Show/hide table
Illustration 2 | g00535506 |
- Install Tooling (B) to guard assembly (1) and attach a suitable lifting device. The weight of the guard assembly is approximately 34 kg (75 lb).
Show/hide table
Illustration 3 | g00560979 |
- Position guard assembly (1) , as shown. Install bolts (2) .
Note: Refer to the Operation and Maintenance Manual for all fluid capacities and the proper filling procedures.
Caterpillar Information System:
D11R Carrydozer Track-Type Tractor Bulldozer Tilt Cylinder - Remove
D11R Carrydozer Track-Type Tractor Bulldozer Lift Cylinder - Install
D11R Carrydozer Track-Type Tractor Bulldozer Lift Cylinder - Remove
D11R Carrydozer Track-Type Tractor Dual Tilt Control Valve - Install
D11R Carrydozer Track-Type Tractor Dual Tilt Control Valve - Remove
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Install
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Remove
988G Wheel Loader Steering System Steering Neutralizer Valve
988G Wheel Loader Bucket Rated Load
988G Wheel Loader Braking System Parking Brake Control Cable - Adjust
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Remove
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Install
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
545 Wheel Skidder Power Train Machine Preparation for Troubleshooting
D8R Track-Type Tractor Power Train Fender
D8R Series II Track-Type Tractor Power Train Drawbar
545 Wheel Skidder Power Train Visual Inspection
545 Wheel Skidder Power Train Power Train Troubleshooting
834G Wheel Tractor and 836G Landfill Compactor Steering System Steering High Pressure System
3054 Engine for Caterpillar Built Machines Lifter Group - Remove and Install