Lifter Group - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7262 | Telescoping Magnet | 1 |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove lifters (1).
Note: Ensure that the lifters are marked with the appropriate cylinder number for installation purposes.
Show/hide table
Illustration 1 | g00540954 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7262 | Telescoping Magnet | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to install lifters (1).
Note: Ensure that the lifters are seated correctly and that the lifters are in the correct cylinders.
Show/hide table
Illustration 2 | g00540954 |
End By:
- Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
834G Wheel Tractor and 836G Landfill Compactor Steering System Steering High Pressure System
545 Wheel Skidder Power Train Power Train Troubleshooting
545 Wheel Skidder Power Train Visual Inspection
D8R Series II Track-Type Tractor Power Train Drawbar
D8R Track-Type Tractor Power Train Fender
545 Wheel Skidder Power Train Machine Preparation for Troubleshooting
D11R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Install
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Remove
D11R Carrydozer Track-Type Tractor Bulldozer Tilt Cylinder - Install
SR4 HV and SR4B HV Generators Winding - Test
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Remove
525B, 535B and 545 Wheel Skidders Grapple Pressure Switch (Grapple Oil)
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Install
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Relief Valve (Line)
3054 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3046 Engine for Caterpillar Built Machines Cylinder Head
973C Track-Type Loader Changing Direction and Speed
SR4 HV and SR4B HV Generators General Maintenance Information
953C Track-Type Loader Horn
834G Wheel Tractor and 836G Landfill Compactor Steering System Steering Control Valve