Usage:
BG-260C (8GN) PAVING PRODUCTS
Problem:
For AP-1000B and BG-260C Asphalt Pavers that are equipped with the Front Wheel Assist option, there have been a few reports where the front wheel assist would not come on.
Solution:
Activation of the front wheel assist is determined by the position of the traction assist switch (must be ON), the gear switch in LOW and speed lever FORWARD. The brake pedal must also be fully returned. On some machines it has been found that the pedal position was found to be partially depressed, which would not allow the front wheel assist feature to be activated. The problem can be resolved by readjusting the brake pedal return and then recalibrating C06 (full up position) and C07 (fully depressed) for the brake pedal.
Reference: Propel Electronic Control System, KENR2949.
COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED