113-1721 Tube Assembly Failure Caterpillar


113-1721 Tube Assembly Failure

Usage:

WHEEL LOADERS980G (2KR2586-2599, 2KR2602-2619, 2KR2621-2626, 2KR2629-2632, 2KR2634) WHEEL LOADERS

Problem:

When the 110-8144 Lift Cylinder Lines Group is under load, 6V-0422 Plug (1) that is pressed into 6V-6268 Elbow (2), may release under pressure. 6V-0422 Plug (1) and 6V-6268 Elbow (2) are located at the end of 113-1721 Tube Assembly (3). This will cause the lifts arms to collapse unexpectedly.

Solution:

Replace 113-1721 Tube Assembly (3) with a new 113-1721 Tube Assembly immediately.

COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Correction To Service Letter, PI3192, "The Software Needs To Be Updated On Certain 992G Wheel Loaders" Correction To Service Letter, PI3192, "The Software Needs To Be Updated On Certain 992G Wheel Loaders"
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC) Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Pre-Lube Switch Contacts Stick Pre-Lube Switch Contacts Stick
The 142-2882 Flow Control Valves May Cause Vibration And Noise In Transmission Hoses The 142-2882 Flow Control Valves May Cause Vibration And Noise In Transmission Hoses
D11 Track-Type Tractor CrN Track Bushing Available For Parts Service D11 Track-Type Tractor CrN Track Bushing Available For Parts Service
Front Wheel Assist May Not Come On For Wheel Type Asphalt Pavers Front Wheel Assist May Not Come On For Wheel Type Asphalt Pavers
Suggestions For Stocking Hoses Suggestions For Stocking Hoses
Engine Fan Drive Group Engine Fan Drive Group
Front Guard Changed To Prevent Interference With Tilt Cylinder Front Guard Changed To Prevent Interference With Tilt Cylinder
Noise In Differential Or Copper In Power-Train Oil Noise In Differential Or Copper In Power-Train Oil
New Hydraulic Electronic Control Improves Blade Control New Hydraulic Electronic Control Improves Blade Control
Air Conditioning Unit May Fall Off The Back Of The Cab On Some 953C Machines Air Conditioning Unit May Fall Off The Back Of The Cab On Some 953C Machines
New Part Number For Engine Shutdown Solenoid New Part Number For Engine Shutdown Solenoid
Burnt Smell And Black Coolant From 3406 Engines In These Wheel-Tractor Scrapers Burnt Smell And Black Coolant From 3406 Engines In These Wheel-Tractor Scrapers
Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position
Procedure To Prevent Rocks Throwing The Fan Belt Procedure To Prevent Rocks Throwing The Fan Belt
Check Valve Failure In Priority Valve Check Valve Failure In Priority Valve
Fuel Line Breakage Fuel Line Breakage
Brake Disc Initial Measurements Brake Disc Initial Measurements
Gas Leak At Ride Control Accumulator Gas Leak At Ride Control Accumulator
Incorrect Torque Specification For Cab Mount Bolts Incorrect Torque Specification For Cab Mount Bolts
Gear Installation Of Hystat Drive Motors Gear Installation Of Hystat Drive Motors
3306 Engine Oil Pan Plate Leaks 3306 Engine Oil Pan Plate Leaks
Brake Pump Pressure Brake Pump Pressure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.