Caterpillar-Built Industrial Engines Available In New Machines{0371,1000}
Usage:
Caterpillar Industrial Engines are now available in several new machines made by Original Equipment Manufacturers. These new engine applications are shown in the chart.
Caterpillar Information System:
1982/07/12 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material){1230,1203,1219}
1982/07/12 New Gear Type Pump Primes Itself At Start-Up{3310,3314}
1982/07/05 Decal For Track Press Information Revised{0624,4169,4170,4175}
1982/07/05 Service Parts Available For The 6V200 Hydraulic Wrench{0623}
1982/07/05 Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates{1217,1201,0664}
1982/07/05 New Crankshaft Wear Sleeve For Engines With Lip-Type Seals{1160,1161}
1982/07/05 Water Cooled Turbocharger Now Used{1052,1307,1380}
1982/07/05 Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/06/28 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28 Explanation For "Notice" And "Warning" In Service Publications{0374,0375}
1982/06/28 Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/07/19 New Service Tools: 31 And 55 Ton Center Hole Hydraulic Cylinders And Relief Valve{0623}
1982/07/19 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1982/07/19 Torque Multiplier Changed To Prevent Lock Up Problems{0614}
1982/07/19 Analyzing A Major Engine Failure{1000}
1982/07/19 Predelivery Inspections{7588}
1982/07/19 Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19 New Air Starting Motor Group Available{1451}
1982/07/19 Change Made To Fuel Nozzle Assembly; New Bleed Screw Used{1254}
1982/08/09 Seat Belt Safety{7327}
1982/08/09 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09 New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09 New Torque Specification For Fuel Injection Pump Bushing{1251,1253}