G3500 Engines Caterpillar


Junction Box

Usage:

G3516 4EK


Illustration 1g03136476

Table 1
Specification for 4P-5283 Junction Box Gp 
Item  Qty  Part  Specification Description 
6V-8185 Nut  Torque to 6 ± 1 N·m (50 ± 9 lb in)
3E-0075 Magnetic Switch Gp  Resistance at 20 °C (68 °F) is 27.5 ± 2.75 Ohms. 
Normal position of contact is open
5C-2890 Nut  Torque to 5.5 ± 0.5 N·m (48.7 ± 4.4 lb in)
3N-1400 Pressure Switch  Final installation torque is 22 ± 3 N·m (195 ± 27 lb in)
Operating temperature is −40 to 121 °C (−40 to 250 °F).
Actuation pressure is 9.0 ± 2.0 kPa (1.3 ± 0.3 psi).
Deactuation pressure is 7 kPa (1 psi).
Position of the contacts below actuation pressure is open.

Caterpillar Information System:

3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Fractured Connecting Rod
G3500B Engines Fuel Lines
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head - Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Component Location - Cabinet (SMS)
EMCPII+ for Gas Engines GSC CID 0566 - FMI 07 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0566 - FMI 07 (for Engine with ECM)
C-10, C-12, C-15 and C-16 Industrial Engines Engine Pressure Sensor Open or Short Circuit - Test
EMCPII+ for Gas Engines GSC CID 0447 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0447 - FMI 12 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0445 - FMI 12 (for Engine with EIS)
3500B and 3500C Marine Engines Camshaft
EMCPII+ for Gas Engines GSC CID 0445 - FMI 12 (for Engine with ECM)
3500B Marine Engines Engine Speed/Timing Sensor - Calibrate
3412 Generator Set Engines Disconnect Switch
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Serrated Connecting Rod
3034 Engine for Caterpillar Built Machines Crankshaft - Install
G3500B Engines Vibration Damper
EMCPII+ for Gas Engines Engine/Generator Programming OP5-0
3500 Industrial Engines Stub Shaft (Front)
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Design
C11, C13 and C15 On-highway Engines Excessive Black Smoke
3406E, C-10 and C-12 On-highway Engines Excessive White Smoke
3126B and 3126E On-highway Engines Can Not Reach Top Engine RPM
3126B and 3126E On-highway Engines Can Not Reach Vehicle Speed Limit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.