Use 6V4173 Clamping Bar Group On Hydraulic Hose Press{0624}
Usage:
All 7S1100 Hydraulic Hose Presses
An improved 6V4173 Clamping Bar Group is available for use with the 7S1100 Hydraulic Hose Press. The new group has a stronger bar, which does not bend during use. It also has a double lead (start) coarse thread which improves the speed by which the clamp can be tightened or loosened. There have been reports that it was possible for the former bar and screw to become damaged during use. Because of the change in threads, the former 1P1848 Screw and the 1P1847 Bar can not be used with the new 6V4173 Clamping Bar Group. The new 6V4173 Clamping Bar Group is serviced only as a group.
6V4173 Clamping Bar Group.
Caterpillar Information System:
1981/04/20 6V4020 Piston Ring Expander Group Available{0622,1215,1214}
1981/04/20 Storage Compartments For Maintenance (Lubrication And Maintenance) Guides{7312}
1981/04/20 Different Check Valve Gives Faster Shifts{3313}
1981/04/13 Correct Installation Of Seal Spacer In Gear-Type Hydraulic Pumps{5073}
1981/04/13 FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13 Check Operation Of Hydramechanical Shutoff At Specific Intervals{7418,7525}
1981/04/13 New Ahead Main Shaft Assembly Gives A Tighter Fit; Dimensions For The Fit Of Shafts And Gears{3300}
1981/04/13 Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13 New 6V3060 EGR System Tester Group Available{1080}
1981/04/13 Use 6V4058 Universal Extension To Remove And Install Starter Bolts{0612}
1981/04/06 Improve Use Of Engine Service Manual Microfiche{0374}
1981/04/06 New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/20 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge{7457,7451,3310,3314}
1981/04/27 Use 6V4089 Reamer Assembly To Clean Nozzle Bores{0622}
1981/04/27 Replacement Thermostat, Element Assemblies Available For Jacket Water Heater{1383}
1981/04/27 Fuel Injection Test Bench Specification Sheets Changed{0652}
1981/04/27 Special Instruction Available For The Use Of The 6V4040 Nitrogen Tire Inflation Group{4203,0374}
1981/05/04 Larger Valve Springs{1108,1101,1252}
1981/05/04 Automatic Shut-Off Systems Not Recommended on Mobile Earthmoving Equipment{7418,7403}
1981/05/04 Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04 Use 6V4057 Grease Gun Adapter In Difficult Access Areas{0671}
1981/05/11 Use 6V4069 Body Group To Remove Tapered Drive Sleeve{0611}
1981/05/11 Caterpillar Cooling System Conditioner (Liquid Or Spin On Elements) Can Be Used In Ford Truck Installations{1350}
1981/05/11 Remove And Install Cam Bearings With 6V4077 Cam Bearing Tool Group{0621,0622}