1981/04/20 Caterpillar


Storage Compartments For Maintenance (Lubrication And Maintenance) Guides{7312}

Usage:


There have been reports that some operators and dealers can not find the Maintenance (Lubrication and Maintenance) Guides or Operation (Operators) Guides on some new machines. Most later machines have a storage compartment on the rear side of the seat backrest. The (CIMA) Construction Industry Manufacturer's Association Safety Manual, Maintenance (Lubrication and Maintenance) Guide, and/or Operation (Operators) Guide will be in this storage compartment on these machines. The Parts Book is too thick and will be in some other location on the machine during shipment from the factory.

Some machines have a smaller literature compartment like the one shown in Illustration 2, which holds only the Operator's Guide and CIMA Safety Manual. In this example both the Parts Book and the Lubrication and Maintenance Guide are kept in some other location. One of the two types of literature compartments is now standard on most machines.


Illustration 1. Seat with literature compartment.


Illustration 2. Literature compartment.

Caterpillar Information System:

1981/04/20 Different Check Valve Gives Faster Shifts{3313}
1981/04/13 Correct Installation Of Seal Spacer In Gear-Type Hydraulic Pumps{5073}
1981/04/13 FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13 Check Operation Of Hydramechanical Shutoff At Specific Intervals{7418,7525}
1981/04/13 New Ahead Main Shaft Assembly Gives A Tighter Fit; Dimensions For The Fit Of Shafts And Gears{3300}
1981/04/13 Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13 New 6V3060 EGR System Tester Group Available{1080}
1981/04/13 Use 6V4058 Universal Extension To Remove And Install Starter Bolts{0612}
1981/04/06 Improve Use Of Engine Service Manual Microfiche{0374}
1981/04/06 New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/06 Correct Refill Capacity For Engine Oil{1318}
1981/04/06 Cooling System Cleaner Removes Rust And Corrosion{1350,1353,1354}
1981/04/20 6V4020 Piston Ring Expander Group Available{0622,1215,1214}
1981/04/20 Use 6V4173 Clamping Bar Group On Hydraulic Hose Press{0624}
1981/04/20 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge{7457,7451,3310,3314}
1981/04/27 Use 6V4089 Reamer Assembly To Clean Nozzle Bores{0622}
1981/04/27 Replacement Thermostat, Element Assemblies Available For Jacket Water Heater{1383}
1981/04/27 Fuel Injection Test Bench Specification Sheets Changed{0652}
1981/04/27 Special Instruction Available For The Use Of The 6V4040 Nitrogen Tire Inflation Group{4203,0374}
1981/05/04 Larger Valve Springs{1108,1101,1252}
1981/05/04 Automatic Shut-Off Systems Not Recommended on Mobile Earthmoving Equipment{7418,7403}
1981/05/04 Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04 Use 6V4057 Grease Gun Adapter In Difficult Access Areas{0671}
1981/05/11 Use 6V4069 Body Group To Remove Tapered Drive Sleeve{0611}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.