Replacement Thermostat, Element Assemblies Available For Jacket Water Heater{1383}
Usage:
All Caterpillar Engines Equipped With 5N5739 And 5N5740 Jacket Water Heaters
The thermostat and element assemblies used in the 5N5739 and 5N5740 Jacket Water Heater are now available for parts service.
The 5N8568 Thermostat is available for use in both of these water heaters. The 5N8566 Element Assembly is available for use in the 5N5739 Jacket Water Heater (120 volt). The 5N8567 Element Assembly is available for use in the 5N5740 Jacket Water Heater (240 volt).
Caterpillar Information System:
1981/04/27 Use 6V4089 Reamer Assembly To Clean Nozzle Bores{0622}
1981/04/20 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge{7457,7451,3310,3314}
1981/04/20 Use 6V4173 Clamping Bar Group On Hydraulic Hose Press{0624}
1981/04/20 6V4020 Piston Ring Expander Group Available{0622,1215,1214}
1981/04/20 Storage Compartments For Maintenance (Lubrication And Maintenance) Guides{7312}
1981/04/20 Different Check Valve Gives Faster Shifts{3313}
1981/04/13 Correct Installation Of Seal Spacer In Gear-Type Hydraulic Pumps{5073}
1981/04/13 FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13 Check Operation Of Hydramechanical Shutoff At Specific Intervals{7418,7525}
1981/04/13 New Ahead Main Shaft Assembly Gives A Tighter Fit; Dimensions For The Fit Of Shafts And Gears{3300}
1981/04/13 Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13 New 6V3060 EGR System Tester Group Available{1080}
1981/04/27 Fuel Injection Test Bench Specification Sheets Changed{0652}
1981/04/27 Special Instruction Available For The Use Of The 6V4040 Nitrogen Tire Inflation Group{4203,0374}
1981/05/04 Larger Valve Springs{1108,1101,1252}
1981/05/04 Automatic Shut-Off Systems Not Recommended on Mobile Earthmoving Equipment{7418,7403}
1981/05/04 Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04 Use 6V4057 Grease Gun Adapter In Difficult Access Areas{0671}
1981/05/11 Use 6V4069 Body Group To Remove Tapered Drive Sleeve{0611}
1981/05/11 Caterpillar Cooling System Conditioner (Liquid Or Spin On Elements) Can Be Used In Ford Truck Installations{1350}
1981/05/11 Remove And Install Cam Bearings With 6V4077 Cam Bearing Tool Group{0621,0622}
1981/05/11 Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups{3055}
1981/05/18 Safety: Battery Vent Caps{1401}
1981/05/18 Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}